[PATCH v5 0/4] mtd:nand:omap2: clean-up of supported ECC schemes

[Gupta, Pekon]

Hi Artem, Brian,

> 
> Changes v4 -> v5
> - Rebased to linux-next
> IMPORTANT: Need to revert commit fb1585b, [PATCH 2/4] part of previous
> version
> 	http://lists.infradead.org/pipermail/linux-mtd/2013-July/047441.html
> 
> - Swapped PATCH-1 & PATCH-2 to maintain bisectibility & compilation
> dependency
> 	http://lists.infradead.org/pipermail/linux-mtd/2013-July/047461.html
> 
> - PATCH-2: re-ordered call to is_elm_present() for later updates ELM driver
> 	- dropped changes in include/linux/platform_data/elm.h (not
> needed)
> - PATCH-3: re-ordered call to is_elm_present() for later updates ELM driver
> - Re-formated patch description (replaced tabs with white-spaces)
> 
> 
> Changes v3 -> v4
> (Resent with CC: devicetree-discuss at lists.ozlabs.org)
> - [Patch 1/3] removed MTD_NAND_OMAP_BCH8 &
> MTD_NAND_OMAP_BCH4 from nand/Kconfig
> 	ECC scheme selectable via nand DT (nand-ecc-opt).
> - [*] rebased for l2-mtd.git
> 
> 
> Changes v2 -> v3
> (Resent with Author Name fixed)
> - PATCH-1: re-arranged code to remove redundancy, added
> NAND_BUSWIDTH_AUTO
> - PATCH-2: updated nand-ecc-opt DT mapping and Documentation
> - PATCH-3: code-cleaning + changes to match PATCH-1
> - PATCH-4 <DROPPED> update DT attribute for ti,nand-ecc-opt
> 	- received feedback to keep DT mapping independent of linuxism
> - PATCH-4:<NEW> : ARM: dts: AM33xx: updated default ECC scheme in nand-
> ecc-opt
> 	- independent patch for AM335x-evm.dts update based on PATCH-2
> 
> 
> Changes v1 -> v2
> 	added 	[PATCH 3/4] and [PATCH 4/4]
> 
> 
> Patches in this series:
> [PATCH 1/4]->[PATCH v5 2/4]: clean-up and optimization for supported ECC
> schemes.
> [PATCH 2/4]->[PATCH v5 1/4]: add separate DT options each supported ECC
> scheme.
> [PATCH 3/4]: update BCH4 ECC implementation (using ELM or using lib/bch.h)
> [PATCH 4/4]: ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-
> opt
> 
> After this patch series, omap2-nand driver will supports following ECC
> schemes:
> +---------------------------------------+---------------+---------------+
> | ECC scheme                            |ECC calculation|Error detection|
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_HAMMING_CODE_DEFAULT          |S/W            |S/W            |
> |OMAP_ECC_HAMMING_CODE_HW               |H/W (GPMC)     |S/W            |
> |OMAP_ECC_HAMMING_CODE_HW_ROMCODE       |H/W (GPMC)     |S/W
> |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W
> (lib/bch.h)|
> |OMAP_ECC_BCH4_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W
> (lib/bch.h)|
> |OMAP_ECC_BCH8_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
> +---------------------------------------+---------------+---------------+
> - Selection of OMAP_ECC_BCHx_CODE_HW_DETECTION_SW requires,
> 	Kconfig: CONFIG_MTD_NAND_ECC_BCH: enables S/W based BCH
> ECC algorithm.
> 
> - Selection of OMAP_ECC_BCHx_CODE_HW requires,
> 	Kconfig: CONFIG_MTD_NAND_OMAP_BCH: enables ELM H/W
> module.
> 

Request to please pick-up this patch series, as following two more
patch series queued up depending on this.

http://lists.infradead.org/pipermail/linux-mtd/2013-July/047538.html

http://lists.infradead.org/pipermail/linux-mtd/2013-July/047562.html


with regards, pekon