[RFC PATCH 4/8] media: cadence: csi2rx: Add RAW10 RGBIr formats

[Rishikesh Donadkar]

On 26/09/26 20:22, Laurent Pinchart wrote:
> On Fri, Sep 25, 2026 at 06:59:57PM +0530, Rishikesh Donadkar wrote:
>> From: Jai Luthra <j-luthra at ti.com>
>>
>> Add 10-bit RGBIr formats to the table to allow capturing them.
>>
>> Signed-off-by: Jai Luthra <j-luthra at ti.com>
>> Signed-off-by: Rishikesh Donadkar <r-donadkar at ti.com>
>> ---
>>   drivers/media/platform/cadence/cdns-csi2rx.c | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
>> index de7cce76397a..8ed730452d3c 100644
>> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
>> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
>> @@ -173,6 +173,14 @@ static const struct csi2rx_fmt formats[] = {
>>   	{ .code	= MEDIA_BUS_FMT_RGB565_1X16,  .bpp = 16, .max_pixels = 1, },
>>   	{ .code	= MEDIA_BUS_FMT_RGB888_1X24,  .bpp = 24, .max_pixels = 1, },
>>   	{ .code	= MEDIA_BUS_FMT_BGR888_1X24,  .bpp = 24, .max_pixels = 1, },
>> +	{ .code	= MEDIA_BUS_FMT_SRGGI10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SGRIG10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SBGGI10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SGBIG10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SGIRG10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SIGGR10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SGIBG10_1X10, .bpp = 10, .max_pixels = 2 },
>> +	{ .code	= MEDIA_BUS_FMT_SIGGB10_1X10, .bpp = 10, .max_pixels = 2 },
> 
> Raw formats will allow supporting all possible CFA patterns without
> having to extend each driver every time a new pattern is added.

Yes, makes sense !

I noticed that patches for RAW format support are present here

https://git.linuxtv.org/sailus/media_tree.git/log/?h=metadata

Is there a plan to merge these into media tree in the near future?
If they are still under review and need more time to get merged, I’ll 
plan to cherry-pick them and rebase my work on top of them.

Regards,
Rishikesh
> 
>>   };
>>   
>>   static void csi2rx_configure_error_irq_mask(void __iomem *base,
>