[RFC PATCH 4/8] media: cadence: csi2rx: Add RAW10 RGBIr formats

[Laurent Pinchart]

On Fri, Sep 25, 2026 at 06:59:57PM +0530, Rishikesh Donadkar wrote:
> From: Jai Luthra <j-luthra at ti.com>
> 
> Add 10-bit RGBIr formats to the table to allow capturing them.
> 
> Signed-off-by: Jai Luthra <j-luthra at ti.com>
> Signed-off-by: Rishikesh Donadkar <r-donadkar at ti.com>
> ---
>  drivers/media/platform/cadence/cdns-csi2rx.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index de7cce76397a..8ed730452d3c 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -173,6 +173,14 @@ static const struct csi2rx_fmt formats[] = {
>  	{ .code	= MEDIA_BUS_FMT_RGB565_1X16,  .bpp = 16, .max_pixels = 1, },
>  	{ .code	= MEDIA_BUS_FMT_RGB888_1X24,  .bpp = 24, .max_pixels = 1, },
>  	{ .code	= MEDIA_BUS_FMT_BGR888_1X24,  .bpp = 24, .max_pixels = 1, },
> +	{ .code	= MEDIA_BUS_FMT_SRGGI10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SGRIG10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SBGGI10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SGBIG10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SGIRG10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SIGGR10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SGIBG10_1X10, .bpp = 10, .max_pixels = 2 },
> +	{ .code	= MEDIA_BUS_FMT_SIGGB10_1X10, .bpp = 10, .max_pixels = 2 },

Raw formats will allow supporting all possible CFA patterns without
having to extend each driver every time a new pattern is added.

>  };
>  
>  static void csi2rx_configure_error_irq_mask(void __iomem *base,

-- 
Regards,

Laurent Pinchart