[PATCH v5 5/7] arm64: dts: rockchip: describe PCIe RTL8125 Ethernet on NanoPi R5S
Diederik de Haas
diederik at cknow-tech.com
Wed Sep 23 11:40:50 PDT 2026
Hi Ricardo,
On Wed Sep 23, 2026 at 8:02 PM CEST, Ricardo Pardini wrote:
> On 23/09/2026 19:15, Diederik de Haas wrote:
>> On Thu Sep 10, 2026 at 10:07 PM CEST, Ricardo Pardini via B4 Relay wrote:
>>> From: Ricardo Pardini <ricardo at pardini.net>
>>>
>>> The FriendlyElec NanoPi R5S (rk3568) carries two on-board Realtek
>>> RTL8125 NICs behind pcie2x1 and pcie3x1, alongside the existing gmac0
>>> RGMII PHY.
>>>
>>> Describe the fixed function nodes and attach ethernet1/ethernet2
>>> aliases (ethernet0 stays mapped to gmac0), so that U-Boot's
>>> fdt_fixup_ethernet() can inject mac-address properties from its
>>> eth1addr/eth2addr env, for stable MACs across boots that both U-Boot
>>> and the kernel agree on.
>>>
>>> Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
>>> ---
>>> arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 30 ++++++++++++++++++++++
>>> 1 file changed, 30 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> index 90ce6f0e1dcff..9ed11663c31c9 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> @@ -15,6 +15,8 @@ / {
>>>
>>> aliases {
>>> ethernet0 = &gmac0;
>>> + ethernet1 = &rtl_eth1;
>>> + ethernet2 = &rtl_eth2;
>>> };
>>
>> With my NanoPi-R5S I'm still getting the following warning:
>>
>> r8169 0001:11:00.0: can't read MAC address, setting random one
>>
>> ```
>> root at nanopi-r5s:~# ip link
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> 2: end1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
>> link/ether 4e:52:85:9e:22:f9 brd ff:ff:ff:ff:ff:ff
>> altname enp1s0
>> altname enx4e52859e22f9
>> 3: end2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
>> link/ether 12:e5:47:9e:e2:f1 brd ff:ff:ff:ff:ff:ff
>> altname enP1p17s0
>> 4: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
>> link/ether 4e:52:85:9e:22:f8 brd ff:ff:ff:ff:ff:ff
>> altname enx4e52859e22f8
>> ```
>>
>> I did not do anything (explicitly) in U-Boot, but it seems it created a
>> non-random MAC address for end0 and end1 ... and then stopped.
>> AFAIK gmac0=end0 already had a non-random MAC address and I hoped/expected
>> it would create non-random addresses for end1 and end2, which would've made
>> the above warning go away too.
>>
>> Is this an issue with this patch, with U-Boot or me?
>
> Hi Diederik, in this case (3 ethernet's) I think it's down to U-boot.
> Check the output of `printenv` in u-boot, you'll probably find it only
> pre-computes 2 MAC addresses, and doesn't feed the ethernet2 alias
> during its fdt_fixup_ethernet().
It's indeed what I suspected. I don't dabble in U-Boot very often, but I seem
to recall it has fixed room for 2 MAC addresses and that would explain the
symptom/problem I described.
> Try doing `setenv eth2addr xx:xx...` in u-boot before booting -- it
> should work. I think that's what I did when testing the R5S with this
> series, but it has been a very long time ago.
I'm going to give it a try and see what happens.
> One way around this (without u-boot) would be to use Alexey's series [1]
> which could compute as many MACs as needed out of the CPU serialnum -
> but that also won't work as-sent vs rk356x, I believe he's checking an
> alternative proposed.
>
> [1]
> https://lore.kernel.org/linux-rockchip/20260902-rk3576-otp-cpuid-mac-v2-0-e4b7fe2ab13f@flipper.net/
Haha! You linked in that thread to Heiko's RK356X OTP patch set and I tested
that hoping/assuming that could help with generating unique MAC addresses.
I see (or think I do) pieces of the puzzle, but I don't know how they all
fit together.
>> Full details:
>> https://paste.sr.ht/~diederik/8ae7d354985afcd1c3464e3a4ad81da1b4442364
>>
>> Side note:
>> I wonder how 'random' those addresses are as during testing ``ssh rock5b``
>> landed me on another device (NanoPC-T6 Plus), f.e. My router has DHCP
>> reservations based on MAC addresses and it looks like it got confused ;-)
>
> Interesting. I dunno what seed is used, as I've been fully set on making
> it non-random, but I wouldn't discard the possibility of conflicts
> across different machines. One more reason to have this series ;-)
They all use the RTL8125BG and I suspect that plays a role in it.
> I'll soon send a v6 to linux-rockchip/dt (with small fixes Sashiko found
> to DTs, and without the binding) and split a single-patch v1 to net-next
> with only the binding, collecting Rob's review. If and when those land,
> we'd have open road both for u-boot local-mac-address and Alexey's
> nvmem-cells for the RTLs.
Awesome, thanks :-)
Cheers,
Diederik
> Regards,
> Ricardo
>
>
>>
>> Cheers,
>> Diederik
>>
>>> gpio-keys {
>>> @@ -107,6 +109,20 @@ &pcie2x1 {
>>> num-lanes = <1>;
>>> reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
>>> status = "okay";
>>> +
>>> + pcie at 0,0 {
>>> + reg = <0x000000 0 0 0 0>;
>>> + #address-cells = <3>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + device_type = "pci";
>>> + bus-range = <0x00 0x0f>;
>>> +
>>> + rtl_eth1: ethernet at 0,0 {
>>> + compatible = "pci10ec,8125";
>>> + reg = <0x010000 0 0 0 0>;
>>> + };
>>> + };
>>> };
>>>
>>> &pcie30phy {
>>> @@ -119,6 +135,20 @@ &pcie3x1 {
>>> reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
>>> vpcie3v3-supply = <&vcc3v3_pcie>;
>>> status = "okay";
>>> +
>>> + pcie at 0,0 {
>>> + reg = <0x100000 0 0 0 0>;
>>> + #address-cells = <3>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + device_type = "pci";
>>> + bus-range = <0x10 0x1f>;
>>> +
>>> + rtl_eth2: ethernet at 0,0 {
>>> + compatible = "pci10ec,8125";
>>> + reg = <0x110000 0 0 0 0>;
>>> + };
>>> + };
>>> };
>>>
>>> &pcie3x2 {
>>
More information about the linux-arm-kernel
mailing list