[PATCH v5 7/7] arm64: dts: rockchip: describe PCIe RTL8125 Ethernet on ROCK 5 ITX

[Ricardo Pardini via B4 Relay]

From: Ricardo Pardini <ricardo at pardini.net>

The Radxa ROCK 5 ITX carries two on-board Realtek RTL8125 NICs behind
pcie2x1l1 and pcie2x1l2.

Describe the fixed function nodes and attach ethernet0/ethernet1
aliases, so that U-Boot's fdt_fixup_ethernet() can inject mac-address
properties from its ethaddr/eth1addr env, for stable MACs across
boots that both U-Boot and the kernel agree on.

Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
---
 arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 6f25e088f3189..f1d6647c57bf9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -20,6 +20,8 @@ / {
 	compatible = "radxa,rock-5-itx", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &rtl_eth0;
+		ethernet1 = &rtl_eth1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
@@ -631,6 +633,20 @@ &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_lan>;
 	status = "okay";
+
+	pcie at 0,0 {
+		reg = <0x300000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x30 0x3f>;
+
+		rtl_eth0: ethernet at 0,0 {
+			compatible = "pci10ec,8125";
+			reg = <0x310000 0 0 0 0>;
+		};
+	};
 };
 
 /* RTL8125B_2 */
@@ -640,6 +656,20 @@ &pcie2x1l2 {
 	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_lan_phy2>;
 	status = "okay";
+
+	pcie at 0,0 {
+		reg = <0x400000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x40 0x4f>;
+
+		rtl_eth1: ethernet at 0,0 {
+			compatible = "pci10ec,8125";
+			reg = <0x410000 0 0 0 0>;
+		};
+	};
 };
 
 &pcie30phy {

-- 
2.55.0