[PATCH v3 10/18] arm64: dts: ti: k3-j722s-evm: Add overlay for fusion application daughter board
Yemike Abhilash Chandra
y-abhilashchandra at ti.com
Wed Sep 23 02:34:51 PDT 2026
From: Vaishnav Achath <vaishnav.a at ti.com>
Fusion application daughter board [1] can be used to connect multiple
FPDLink-III based sensors to TI EVMs. The board has two DS90UB960
deserializers, each of which aggregates input from up to 4x FPDLink-III
sensors. Up to 8x sensors can simultaneously stream over the two CSI RX
ports on J722S-EVM.
[1]: https://svtronics.com/product/fusion-application-daughter-board-evm577pfusion-v1-0/
Reviewed-by: Rishikesh Donadkar <r-donadkar at ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a at ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
---
Changes in v3:
- Rename fixed-clock node to the generic clock-<frequency> form
(Krzysztof)
- Also rename fixed-clock label to lowercase
- Override CSI2RX ports using &csiN_port0 labels instead of the full
&cdns_csi2rxN node path, and drop duplicated properties (Krzysztof)
- Use GPL-2.0-only OR MIT license for consistency
- Update copyright year to 2026 (Udit)
arch/arm64/boot/dts/ti/Makefile | 4 +
.../dts/ti/k3-j722s-evm-fpdlink-fusion.dtso | 179 ++++++++++++++++++
2 files changed, 183 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-evm-fpdlink-fusion.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 15b69fb1cd43..0fff4c815597 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -210,6 +210,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai-csi1-imx219.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-fpdlink-fusion.dtbo
# Boards with J784s4 SoC
k3-am69-aquila-clover-panel-cap-touch-10inch-dsi-dtbs := \
@@ -429,6 +430,8 @@ k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
+k3-j722s-evm-fpdlink-fusion-dtbs := k3-j722s-evm.dtb \
+ k3-j722s-evm-fpdlink-fusion.dtbo
k3-j742s2-evm-fpdlink-fusion-dtbs := k3-j742s2-evm.dtb \
k3-j721s2-evm-fusion.dtbo
k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
@@ -530,6 +533,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-j721s2-evm-usb0-type-a.dtb \
k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
+ k3-j722s-evm-fpdlink-fusion.dtb \
k3-j742s2-evm-fpdlink-fusion.dtb \
k3-j742s2-evm-usb0-type-a.dtb \
k3-j784s4-evm-fpdlink-fusion.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-fpdlink-fusion.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-fpdlink-fusion.dtso
new file mode 100644
index 000000000000..05fb61eb19de
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-fpdlink-fusion.dtso
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for Fusion (FPD-Link III) board on J722S EVM
+ * https://svtronics.com/product/fusion-application-daughter-board-evm577pfusion-v1-0/
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ clk_fusion_25mhz: clock-25000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&pca9543_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ deser at 3d {
+ compatible = "ti,ds90ub960-q1";
+ reg = <0x3d>;
+ clocks = <&clk_fusion_25mhz>;
+ clock-names = "refclk";
+ i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+ ds90ub960_0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ port at 1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ port at 2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ port at 3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ /* CSI-2 TX */
+ port at 4 {
+ reg = <4>;
+ ds90ub960_0_csi_out: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ remote-endpoint = <&csi2_phy0>;
+ };
+ };
+
+ port at 5 {
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ ds90ub960_0_links: links {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ deser at 36 {
+ compatible = "ti,ds90ub960-q1";
+ reg = <0x36>;
+ clocks = <&clk_fusion_25mhz>;
+ clock-names = "refclk";
+ i2c-alias-pool = <0x5a 0x5b 0x5c 0x5d 0x5e 0x5f>;
+
+ ds90ub960_1_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ port at 1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ port at 2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ port at 3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ /* CSI-2 TX */
+ port at 4 {
+ reg = <4>;
+ ds90ub960_1_csi_out: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ remote-endpoint = <&csi2_phy1>;
+ };
+ };
+
+ port at 5 {
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ ds90ub960_1_links: links {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ };
+};
+
+&csi0_port0 {
+ status = "okay";
+
+ csi2_phy0: endpoint {
+ remote-endpoint = <&ds90ub960_0_csi_out>;
+ bus-type = <4>; /* CSI2 DPHY */
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ };
+};
+
+&csi1_port0 {
+ status = "okay";
+
+ csi2_phy1: endpoint {
+ remote-endpoint = <&ds90ub960_1_csi_out>;
+ bus-type = <4>; /* CSI2 DPHY */
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ };
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&ti_csi2rx1 {
+ status = "okay";
+};
+
+&dphy1 {
+ status = "okay";
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list