[PATCH v2 2/5] clk: sunxi-ng: mp: support clocks with just a shift register

[Chen-Yu Tsai]

On Fri, Sep 18, 2026 at 6:39 AM Andre Przywara <andre.przywara at arm.com> wrote:
>
> The "mp" clock models a mod clock with divider and a shift field. At
> least one clock in the Allwinner A523 features just a power-of-2 divider
> field, so support an initialisation of the clock without providing an
> actual divider field.

Please just use the single divider clock type instead. It properly supports
power-of-2 dividers.

ChenYu

> Add a check whether the "width" field is 0, and skip the divider
> handling in this case, as the GENMASK macro will not work with a zero
> length.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  drivers/clk/sunxi-ng/ccu_mp.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
> index 7cdb0eedc69b5..3896cb94bf733 100644
> --- a/drivers/clk/sunxi-ng/ccu_mp.c
> +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> @@ -236,9 +236,11 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
>         spin_lock_irqsave(cmp->common.lock, flags);
>
>         reg = readl(cmp->common.base + cmp->common.reg);
> -       reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
> +       if (cmp->m.width)
> +               reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
>         reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
> -       reg |= (m - cmp->m.offset) << cmp->m.shift;
> +       if (cmp->m.width)
> +               reg |= (m - cmp->m.offset) << cmp->m.shift;
>         if (shift)
>                 reg |= ilog2(p) << cmp->p.shift;
>         else
> --
> 2.43.0
>