[PATCH v1 1/2] dt-bindings: ethernet: eswin: add clock sampling control

[Andrew Lunn]

> On EIC7700, RXC and RXD experience an internal skew before reaching the
> MAC. At high speed, this can shift the effective sampling point by
> approximately half a cycle, causing the MAC to sample the wrong nibble
> on each edge.

You say internal. So the skew is fixed, it is a property of the
silicon? If so, why a DT property? Why not just hard code it in the
driver? Since it is internal, different boards should not need it set
differently?

	Andrew