[PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93W EVK board

[Krzysztof Kozlowski]

On 21/01/2026 04:18, Sherry Sun wrote:
> 
> 
>> Subject: Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93W EVK board
>>
>> On Tue, Jan 20, 2026 at 06:26:03PM +0800, Sherry Sun wrote:
>>> Add DT compatible string for NXP i.MX93W EVK board.
>>>
>>> Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
>>> ---
>>>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>>>  1 file changed, 1 insertion(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml
>> b/Documentation/devicetree/bindings/arm/fsl.yaml
>>> index 93ad6f0027d0..1769f243d70f 100644
>>> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
>>> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
>>> @@ -1432,6 +1432,7 @@ properties:
>>>                - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
>>>                - fsl,imx93-11x11-frdm      # i.MX93 11x11 FRDM Board
>>>                - fsl,imx93-14x14-evk       # i.MX93 14x14 EVK Board
>>> +              - fsl,imx93w-evk            # i.MX93W EVK Board
>>
>> Is 93w 11x11 or 14x14? can you add suffix to keep align existing one.
>>
> 
> Hi Frank,
> 
> IMX93W-EVK is the official board name, it basically reuse the  i.MX93 11x11
> EVK board, as described in the cover letter and dts patch. I prefer to still use
> this name (imx93w-evk) to keep align with the board official name. 
It's second case, previous was frdm, with the same argument. I don't
care what you prefer internally. You must align to upstream and all NXP
boards are called soc-foo. Not socfoo.


Best regards,
Krzysztof