[PATCH 0/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 board

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen at rock-chips.com>

According to the description in the net documentation, PHY modes
"rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock signal
to be delayed on the PCB.

The Rockchip platform has long used the above mentioned PHY modes and
private delay prop to describe the internal IO delay settings of the
chip, which is inconsistent with what is described in the documentation.

Some background, for RK3576, you can assume that:

        tx_delay_time(ns) = 0.0579 * delay_line_count + 0.105

For example, tx_delay = <0x20> means:

        time = 0.0579 * 0x20 + 0.105 ns = 1.9578 ns

Recently, Andrew has often mentioned the problem of phy mode in board
level configuration. So let's start with the RK3576 to modify this.

Please test this series of patches, thanks.

Chaoyi Chen (3):
  arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 evb1
  arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for
    roc-rk3576-pc
  arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for ROCK 4D

 arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 8 ++++----
 arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts   | 5 ++---
 arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts  | 5 ++---
 3 files changed, 8 insertions(+), 10 deletions(-)

-- 
2.51.1