[PATCH 1/9] ARM: dts: stm32: update i2c nodes interrupt/dma in stm32mp151

[Alain Volmat]

Update all i2c nodes with the following properties:
  - replace interrupts with interrupts-extended and rely on exti
  - add dma properties

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp151.dtsi | 42 +++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index b1b568dfd126..5dae9145ef93 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -867,12 +867,15 @@ i2c1: i2c at 40012000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x40012000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 21 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C1_K>;
 				resets = <&rcc I2C1_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&dmamux1 33 0x400 0x1>,
+				       <&dmamux1 34 0x400 0x1>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x1>;
 				wakeup-source;
 				i2c-analog-filter;
@@ -884,12 +887,15 @@ i2c2: i2c at 40013000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x40013000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 22 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C2_K>;
 				resets = <&rcc I2C2_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&dmamux1 35 0x400 0x1>,
+				       <&dmamux1 36 0x400 0x1>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x2>;
 				wakeup-source;
 				i2c-analog-filter;
@@ -901,12 +907,15 @@ i2c3: i2c at 40014000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x40014000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 23 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C3_K>;
 				resets = <&rcc I2C3_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&dmamux1 73 0x400 0x1>,
+				       <&dmamux1 74 0x400 0x1>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x4>;
 				wakeup-source;
 				i2c-analog-filter;
@@ -918,12 +927,15 @@ i2c5: i2c at 40015000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x40015000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 25 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C5_K>;
 				resets = <&rcc I2C5_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&dmamux1 115 0x400 0x1>,
+				       <&dmamux1 116 0x400 0x1>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x10>;
 				wakeup-source;
 				i2c-analog-filter;
@@ -1829,12 +1841,15 @@ i2c4: i2c at 5c002000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x5c002000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C4_K>;
 				resets = <&rcc I2C4_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
+				       <&mdma1 37 0x0 0x40002 0x0 0x0>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x8>;
 				wakeup-source;
 				i2c-analog-filter;
@@ -1846,12 +1861,15 @@ i2c6: i2c at 5c009000 {
 				compatible = "st,stm32mp15-i2c";
 				reg = <0x5c009000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 54 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C6_K>;
 				resets = <&rcc I2C6_R>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&mdma1 38 0x0 0x40008 0x0 0x0>,
+				       <&mdma1 39 0x0 0x40002 0x0 0x0>;
+				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x20>;
 				wakeup-source;
 				i2c-analog-filter;

-- 
2.34.1