[PATCH 2/9] ARM: dts: stm32: update i2c nodes interrupt/wakeup-source in stm32mp131

[Alain Volmat]

Update all i2c nodes with the following properties:
  - replace interrupts with interrupts-extended and rely on exti
  - add the wakeup-source property

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp131.dtsi | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b9657ff91c23..eacc48cc0fa9 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -469,8 +469,8 @@ i2c1: i2c at 40012000 {
 			compatible = "st,stm32mp13-i2c";
 			reg = <0x40012000 0x400>;
 			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc I2C1_K>;
 			resets = <&rcc I2C1_R>;
 			#address-cells = <1>;
@@ -478,6 +478,7 @@ i2c1: i2c at 40012000 {
 			dmas = <&dmamux1 33 0x400 0x1>,
 			       <&dmamux1 34 0x400 0x1>;
 			dma-names = "rx", "tx";
+			wakeup-source;
 			st,syscfg-fmp = <&syscfg 0x4 0x1>;
 			i2c-analog-filter;
 			status = "disabled";
@@ -487,8 +488,8 @@ i2c2: i2c at 40013000 {
 			compatible = "st,stm32mp13-i2c";
 			reg = <0x40013000 0x400>;
 			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc I2C2_K>;
 			resets = <&rcc I2C2_R>;
 			#address-cells = <1>;
@@ -497,6 +498,7 @@ i2c2: i2c at 40013000 {
 			       <&dmamux1 36 0x400 0x1>;
 			dma-names = "rx", "tx";
 			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			wakeup-source;
 			i2c-analog-filter;
 			status = "disabled";
 		};
@@ -1195,8 +1197,8 @@ i2c3: i2c at 4c004000 {
 				compatible = "st,stm32mp13-i2c";
 				reg = <0x4c004000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 23 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C3_K>;
 				resets = <&rcc I2C3_R>;
 				#address-cells = <1>;
@@ -1205,6 +1207,7 @@ i2c3: i2c at 4c004000 {
 				       <&dmamux1 74 0x400 0x1>;
 				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x4>;
+				wakeup-source;
 				i2c-analog-filter;
 				access-controllers = <&etzpc 20>;
 				status = "disabled";
@@ -1214,8 +1217,8 @@ i2c4: i2c at 4c005000 {
 				compatible = "st,stm32mp13-i2c";
 				reg = <0x4c005000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C4_K>;
 				resets = <&rcc I2C4_R>;
 				#address-cells = <1>;
@@ -1224,6 +1227,7 @@ i2c4: i2c at 4c005000 {
 				       <&dmamux1 76 0x400 0x1>;
 				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x8>;
+				wakeup-source;
 				i2c-analog-filter;
 				access-controllers = <&etzpc 21>;
 				status = "disabled";
@@ -1233,8 +1237,8 @@ i2c5: i2c at 4c006000 {
 				compatible = "st,stm32mp13-i2c";
 				reg = <0x4c006000 0x400>;
 				interrupt-names = "event", "error";
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&exti 25 IRQ_TYPE_LEVEL_HIGH>,
+						      <&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc I2C5_K>;
 				resets = <&rcc I2C5_R>;
 				#address-cells = <1>;
@@ -1243,6 +1247,7 @@ i2c5: i2c at 4c006000 {
 				       <&dmamux1 116 0x400 0x1>;
 				dma-names = "rx", "tx";
 				st,syscfg-fmp = <&syscfg 0x4 0x10>;
+				wakeup-source;
 				i2c-analog-filter;
 				access-controllers = <&etzpc 22>;
 				status = "disabled";

-- 
2.34.1