[PATCH v2 5/5] PCI: qcom: Add D3cold support
Krishna Chaitanya Chundru
krishna.chundru at oss.qualcomm.com
Tue Feb 17 03:19:10 PST 2026
Add support for transitioning Qcom PCIe controllers into D3cold by
integrating with the DWC core suspend/resume helpers.
Implement PME_TurnOff message generation via ELBI_SYS_CTRL and hook it
into the DWC host operations so the controller follows the standard
PME_TurnOff-based power-down sequence before entering D3cold.
When the link is suspended into D3cold, fully tear down interconnect
bandwidth, OPP votes. If D3cold is not entered, retain existing behavior
by keeping the required interconnect and OPP votes.
Drop the qcom_pcie::suspended flag and rely on the existing
dw_pcie::suspended state, which now drives both the power-management
flow and the interconnect/OPP handling.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru at oss.qualcomm.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 121 ++++++++++++++++++++-------------
1 file changed, 74 insertions(+), 47 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index b02c19bbdf2ea5db252c2a0281a569bb3a0cc497..37442bbe588c36b0b0414cc4d0016da2d8424a87 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -145,6 +145,7 @@
/* ELBI_SYS_CTRL register fields */
#define ELBI_SYS_CTRL_LT_ENABLE BIT(0)
+#define ELBI_SYS_CTRL_PME_TURNOFF_MSG BIT(4)
/* AXI_MSTR_RESP_COMP_CTRL0 register fields */
#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4
@@ -283,7 +284,6 @@ struct qcom_pcie {
const struct qcom_pcie_cfg *cfg;
struct dentry *debugfs;
struct list_head ports;
- bool suspended;
bool use_pm_opp;
};
@@ -1401,10 +1401,18 @@ static void qcom_pcie_host_post_init(struct dw_pcie_rp *pp)
pcie->cfg->ops->host_post_init(pcie);
}
+static void qcom_pcie_host_pme_turn_off(struct dw_pcie_rp *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+
+ writel(ELBI_SYS_CTRL_PME_TURNOFF_MSG, pci->elbi_base + ELBI_SYS_CTRL);
+}
+
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
.init = qcom_pcie_host_init,
.deinit = qcom_pcie_host_deinit,
.post_init = qcom_pcie_host_post_init,
+ .pme_turn_off = qcom_pcie_host_pme_turn_off,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -2069,53 +2077,51 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
if (!pcie)
return 0;
- /*
- * Set minimum bandwidth required to keep data path functional during
- * suspend.
- */
- if (pcie->icc_mem) {
- ret = icc_set_bw(pcie->icc_mem, 0, kBps_to_icc(1));
- if (ret) {
- dev_err(dev,
- "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
- ret);
- return ret;
- }
- }
+ ret = dw_pcie_suspend_noirq(pcie->pci);
+ if (ret)
+ return ret;
- /*
- * Turn OFF the resources only for controllers without active PCIe
- * devices. For controllers with active devices, the resources are kept
- * ON and the link is expected to be in L0/L1 (sub)states.
- *
- * Turning OFF the resources for controllers with active PCIe devices
- * will trigger access violation during the end of the suspend cycle,
- * as kernel tries to access the PCIe devices config space for masking
- * MSIs.
- *
- * Also, it is not desirable to put the link into L2/L3 state as that
- * implies VDD supply will be removed and the devices may go into
- * powerdown state. This will affect the lifetime of the storage devices
- * like NVMe.
- */
- if (!dw_pcie_link_up(pcie->pci)) {
- qcom_pcie_host_deinit(&pcie->pci->pp);
- pcie->suspended = true;
- }
+ if (pcie->pci->suspended) {
+ ret = icc_disable(pcie->icc_mem);
+ if (ret)
+ dev_err(dev, "Failed to disable PCIe-MEM interconnect path: %d\n", ret);
- /*
- * Only disable CPU-PCIe interconnect path if the suspend is non-S2RAM.
- * Because on some platforms, DBI access can happen very late during the
- * S2RAM and a non-active CPU-PCIe interconnect path may lead to NoC
- * error.
- */
- if (pm_suspend_target_state != PM_SUSPEND_MEM) {
ret = icc_disable(pcie->icc_cpu);
if (ret)
dev_err(dev, "Failed to disable CPU-PCIe interconnect path: %d\n", ret);
if (pcie->use_pm_opp)
dev_pm_opp_set_opp(pcie->pci->dev, NULL);
+ } else {
+ /*
+ * Set minimum bandwidth required to keep data path functional during
+ * suspend.
+ */
+ if (pcie->icc_mem) {
+ ret = icc_set_bw(pcie->icc_mem, 0, kBps_to_icc(1));
+ if (ret) {
+ dev_err(dev,
+ "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ /*
+ * Only disable CPU-PCIe interconnect path if the suspend is non-S2RAM.
+ * Because on some platforms, DBI access can happen very late during the
+ * S2RAM and a non-active CPU-PCIe interconnect path may lead to NoC
+ * error.
+ */
+ if (pm_suspend_target_state != PM_SUSPEND_MEM) {
+ ret = icc_disable(pcie->icc_cpu);
+ if (ret)
+ dev_err(dev, "Failed to disable CPU-PCIe interconnect path: %d\n",
+ ret);
+
+ if (pcie->use_pm_opp)
+ dev_pm_opp_set_opp(pcie->pci->dev, NULL);
+ }
}
return ret;
}
@@ -2129,25 +2135,46 @@ static int qcom_pcie_resume_noirq(struct device *dev)
if (!pcie)
return 0;
- if (pm_suspend_target_state != PM_SUSPEND_MEM) {
+ if (pcie->pci->suspended) {
ret = icc_enable(pcie->icc_cpu);
if (ret) {
dev_err(dev, "Failed to enable CPU-PCIe interconnect path: %d\n", ret);
return ret;
}
- }
- if (pcie->suspended) {
- ret = qcom_pcie_host_init(&pcie->pci->pp);
- if (ret)
- return ret;
+ ret = icc_enable(pcie->icc_mem);
+ if (ret) {
+ dev_err(dev, "Failed to enable PCIe-MEM interconnect path: %d\n", ret);
+ goto disable_icc_cpu;
+ }
- pcie->suspended = false;
+ /*
+ * Ignore -ETIMEDOUT here since it is expected when no endpoint is
+ * connected to the PCIe link.
+ */
+ ret = dw_pcie_resume_noirq(pcie->pci);
+ if (ret && (ret != -ETIMEDOUT))
+ goto disable_icc_mem;
+ } else {
+ if (pm_suspend_target_state != PM_SUSPEND_MEM) {
+ ret = icc_enable(pcie->icc_cpu);
+ if (ret) {
+ dev_err(dev, "Failed to enable CPU-PCIe interconnect path: %d\n",
+ ret);
+ return ret;
+ }
+ }
}
qcom_pcie_icc_opp_update(pcie);
return 0;
+disable_icc_mem:
+ icc_disable(pcie->icc_mem);
+disable_icc_cpu:
+ icc_disable(pcie->icc_cpu);
+
+ return ret;
}
static const struct of_device_id qcom_pcie_match[] = {
--
2.34.1
More information about the linux-arm-kernel
mailing list