[PATCH 2/8] ARM: dts: imx28: add nand at 0 node and partitions

Frank Li Frank.Li at nxp.com
Thu Feb 12 08:19:44 PST 2026


Add a nand at 0 node and partitions subnode for NAND. Move the raw NAND
properties under nand at 0. Remove redundant #address-cells and #size-cells at
board dts files.

Fix the below CHECK_DTBS warnings.

arch/arm/boot/dts/nxp/mxs/imx28-apf28.dtb: nand-controller at 8000c000 (fsl,imx28-gpmi-nand): Unevaluated properties are not allowed ('partition at 0', 'partition at 300000', 'partition at 380000', 'partition at 400000', 'partition at 480000', 'partition at 500000', 'partition at d00000' were unexpected)

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts  | 64 +++++++++++++++++-------------
 arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi   |  2 -
 arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts | 28 ++++++++-----
 arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts   |  6 ++-
 4 files changed, 60 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
index 98672932e41bd8b9ee94efd2a11947fdb3ec7aa3..10bfac31f672cb4d473e16f2ce725c3ba359d9c4 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
@@ -27,39 +27,49 @@ &gpmi {
 	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 	status = "okay";
 
-	partition at 0 {
-		label = "u-boot";
-		reg = <0x0 0x300000>;
-	};
+	nand at 0 {
+		reg = <0>;
 
-	partition at 300000 {
-		label = "env";
-		reg = <0x300000 0x80000>;
-	};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-	partition at 380000 {
-		label = "env2";
-		reg = <0x380000 0x80000>;
-	};
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0 0x300000>;
+			};
 
-	partition at 400000 {
-		label = "dtb";
-		reg = <0x400000 0x80000>;
-	};
+			partition at 300000 {
+				label = "env";
+				reg = <0x300000 0x80000>;
+			};
 
-	partition at 480000 {
-		label = "splash";
-		reg = <0x480000 0x80000>;
-	};
+			partition at 380000 {
+				label = "env2";
+				reg = <0x380000 0x80000>;
+			};
 
-	partition at 500000 {
-		label = "kernel";
-		reg = <0x500000 0x800000>;
-	};
+			partition at 400000 {
+				label = "dtb";
+				reg = <0x400000 0x80000>;
+			};
+
+			partition at 480000 {
+				label = "splash";
+				reg = <0x480000 0x80000>;
+			};
+
+			partition at 500000 {
+				label = "kernel";
+				reg = <0x500000 0x800000>;
+			};
 
-	partition at d00000 {
-		label = "rootfs";
-		reg = <0xd00000 0xf300000>;
+			partition at d00000 {
+				label = "rootfs";
+				reg = <0xd00000 0xf300000>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
index 66facef10ba97690decb56ff0648d7fbb0a7bd9b..54b0f715f0918a538bff59762110c49afa52459b 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
@@ -24,8 +24,6 @@ reg_3p3v: regulator-0 {
 };
 
 &gpmi {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
index 34b4d3246db197a0588abc2d03ebabad3b0c4ca4..24bacc9ba10bf42671426d37d35c25055261e27c 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -93,21 +93,29 @@ &duart {
 };
 
 &gpmi {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 	status = "okay";
 
-	partition at 0 {
-		label = "gpmi-nfc-0-boot";
-		reg = <0x00000000 0x01400000>;
-		read-only;
-	};
+	nand at 0 {
+		reg = <0>;
 
-	partition at 1 {
-		label = "gpmi-nfc-general-use";
-		reg = <0x01400000 0x0ec00000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "gpmi-nfc-0-boot";
+				reg = <0x00000000 0x01400000>;
+				read-only;
+			};
+
+			partition at 1400000 {
+				label = "gpmi-nfc-general-use";
+				reg = <0x01400000 0x0ec00000>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 9290635352f12c963243efc3d2fcbf0f19af8f8b..07c098ea2e154ebc9ef9c792f6b9351e1a74e67f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -247,8 +247,12 @@ &duart {
 
 &gpmi {
 	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	nand-on-flash-bbt;
 	status = "okay";
+
+	nand at 0 {
+		reg = <0>;
+		nand-on-flash-bbt;
+	};
 };
 
 &i2c0 {

-- 
2.43.0




More information about the linux-arm-kernel mailing list