[PATCH 1/8] ARM: dts: imx23/28: set #size-cells of NAND controller to 0

[Frank Li]

Set #size-cells of the nand-controller node to 0 to fix CHECK_DTBS
warnings.
arch/arm/boot/dts/nxp/mxs/imx28-apf28.dtb: nand-controller at 8000c000 (fsl,imx28-gpmi-nand): #size-cells: 0 was expected

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 2 +-
 arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 5e21252fb7c96965a627db7dd90f53889c72af30..368ba94d8a20b2f2c240dfbfc053985c19f4b643 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -77,7 +77,7 @@ ecc at 80008000 {
 			nand-controller at 8000c000 {
 				compatible = "fsl,imx23-gpmi-nand";
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <56>;
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index ece46d0e7c7fcd7d36e1a3beb96d36c6c4d594da..281a0249a0e1d7bd84d6db82f89e780238899ff2 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -99,7 +99,7 @@ perfmon: perfmon at 80006000 {
 			gpmi: nand-controller at 8000c000 {
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <41>;

-- 
2.43.0