[PATCH] arm64: dts: broadcom: bcm2712: adjust display status

[Peter Robinson]

Typically non critical IP in a SoC are disabled by
default in the SoC .dtsi and enabled on board specific
configs. There are usecases, such as some CM5 carrier
boards, where display output may not be desired or
connected. So disable them on the SoC .dtsi and enable
them on the RPi5 board.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Dave Stevenson <dave.stevenson at raspberrypi.com>
Cc: Andrea della Porta <andrea.porta at suse.com>
Fixes: 25d77bdd7df2 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
---
 .../dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts  | 31 +++++++++++++++++++
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 11 +++++++
 2 files changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
index 6ea3c102e0d67..359c262b8d956 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -97,19 +97,42 @@ power: power {
 	};
 };
 
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&disp_intr {
+	status = "okay";
+};
+
 &hvs {
 	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
 	clock-names = "core", "disp";
+	status = "okay";
 };
 
 &hdmi0 {
 	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
 	clock-names = "hdmi", "bvb", "audio", "cec";
+	status = "okay";
 };
 
 &hdmi1 {
 	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
 	clock-names = "hdmi", "bvb", "audio", "cec";
+	status = "okay";
+};
+
+&mop {
+	status = "okay";
+};
+
+&moplet {
+	status = "okay";
 };
 
 &pcie1 {
@@ -119,3 +142,11 @@ &pcie1 {
 &pcie2 {
 	status = "okay";
 };
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 4cae17c04b50a..4cd51d80d40d0 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -287,12 +287,14 @@ pixelvalve0: pixelvalve at 7c410000 {
 			compatible = "brcm,bcm2712-pixelvalve0";
 			reg = <0x7c410000 0x100>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		pixelvalve1: pixelvalve at 7c411000 {
 			compatible = "brcm,bcm2712-pixelvalve1";
 			reg = <0x7c411000 0x100>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		mop: mop at 7c500000 {
@@ -300,6 +302,7 @@ mop: mop at 7c500000 {
 			reg = <0x7c500000 0x28>;
 			interrupt-parent = <&disp_intr>;
 			interrupts = <1>;
+			status = "disabled";
 		};
 
 		moplet: moplet at 7c501000 {
@@ -307,6 +310,7 @@ moplet: moplet at 7c501000 {
 			reg = <0x7c501000 0x20>;
 			interrupt-parent = <&disp_intr>;
 			interrupts = <0>;
+			status = "disabled";
 		};
 
 		disp_intr: interrupt-controller at 7c502000 {
@@ -315,6 +319,7 @@ disp_intr: interrupt-controller at 7c502000 {
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			status = "disabled";
 		};
 
 		dvp: clock at 7c700000 {
@@ -333,6 +338,7 @@ ddc0: i2c at 7d508200 {
 			clock-frequency = <97500>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		ddc1: i2c at 7d508280 {
@@ -343,6 +349,7 @@ ddc1: i2c at 7d508280 {
 			clock-frequency = <97500>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		bsc_irq: interrupt-controller at 7d508380 {
@@ -388,6 +395,7 @@ hdmi0: hdmi at 7c701400 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
+			status = "disabled";
 		};
 
 		hdmi1: hdmi at 7c706400 {
@@ -417,6 +425,7 @@ hdmi1: hdmi at 7c706400 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "hpd-connected", "hpd-removed";
 			ddc = <&ddc1>;
+			status = "disabled";
 		};
 	};
 
@@ -439,6 +448,7 @@ axi: axi {
 
 		vc4: gpu {
 			compatible = "brcm,bcm2712-vc6";
+			status = "disabled";
 		};
 
 		pcie0: pcie at 1000100000 {
@@ -611,5 +621,6 @@ hvs: hvs at 107c580000 {
 		interrupt-parent = <&disp_intr>;
 		interrupts = <2>, <9>, <16>;
 		interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+		status = "disabled";
 	};
 };
-- 
2.51.0