[PATCH v2 1/7] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag

[Kendall Willis]

On 8/12/25 04:15, Markus Schneider-Pargmann wrote:
> WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
> in that case.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> ---
>   arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> index c0f09be8d3f94a70812b66c3f91626aac35f4026..d3b0ecdf1a4a4de25ee6121ec9e62d1c7df26eb9 100644
> --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
> +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> @@ -19,6 +19,7 @@
>   #define DS_OUT_VAL_SHIFT	(26)
>   #define DS_PULLUD_EN_SHIFT	(27)
>   #define DS_PULLTYPE_SEL_SHIFT	(28)
> +#define WKUP_EN_SHIFT		(29)
>   
>   /* Schmitt trigger configuration */
>   #define ST_DISABLE		(0 << ST_EN_SHIFT)
> @@ -65,6 +66,7 @@
>   #define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
>   #define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
>   #define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
> +#define WKUP_EN				(1 << WKUP_EN_SHIFT)
>   
>   /* Default mux configuration for gpio-ranges to use with pinctrl */
>   #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)
> 

Reviewed-by: Kendall Willis <k-willis at ti.com>