[PATCH v2 1/7] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag

[Markus Schneider-Pargmann]

WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
in that case.

Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c0f09be8d3f94a70812b66c3f91626aac35f4026..d3b0ecdf1a4a4de25ee6121ec9e62d1c7df26eb9 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -19,6 +19,7 @@
 #define DS_OUT_VAL_SHIFT	(26)
 #define DS_PULLUD_EN_SHIFT	(27)
 #define DS_PULLTYPE_SEL_SHIFT	(28)
+#define WKUP_EN_SHIFT		(29)
 
 /* Schmitt trigger configuration */
 #define ST_DISABLE		(0 << ST_EN_SHIFT)
@@ -65,6 +66,7 @@
 #define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
 #define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
+#define WKUP_EN				(1 << WKUP_EN_SHIFT)
 
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)

-- 
2.50.1