[PATCH] ARM: dts: stm32: Fix STM32MP13xx pinmux node eth2-rgmii-sleep-0 copy-paste error

[Alexandre TORGUE]

Hi Marek

On 6/26/24 05:07, Marek Vasut wrote:
> Fix pin copy-paste error in STM32MP13xx eth2-rgmii-sleep-0 pinmux
> node. Clearly the pins like PG11 are not supposed to be duplicated
> in the node pinmux property, fix them up to match the hardware pin
> assignment.
> 
> Fixes: d1193e65647e ("ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board")
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: Christophe Roullier <christophe.roullier at foss.st.com>
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: kernel at dh-electronics.com
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> ---
>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
> index 42995a8f5034c..9c7cf8f3c3e8b 100644
> --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
> @@ -157,16 +157,16 @@ eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
>   				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
> -				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD2 */
> -				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
> -				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RGMII_TX_CTL */
> -				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_GTX_CLK */
> -				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
> +				 <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
> +				 <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
> +				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
> +				 <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
> +				 <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
>   				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
>   				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
>   				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
> -				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD2 */
> -				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD3 */
> +				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
> +				 <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
>   				 <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
>   				 <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
>   		};

Applied on stm32-next. I think I'll squash the two fixes (this patch and 
the other one for the makefile) onto the initial patch when I create my 
PR vor v6.11.

Regards
Alex