[PATCH] ARM: dts: stm32: Fix STM32MP13xx pinmux node eth2-rgmii-sleep-0 copy-paste error

[Marek Vasut]

Fix pin copy-paste error in STM32MP13xx eth2-rgmii-sleep-0 pinmux
node. Clearly the pins like PG11 are not supposed to be duplicated
in the node pinmux property, fix them up to match the hardware pin
assignment.

Fixes: d1193e65647e ("ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board")
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
Cc: Christophe Roullier <christophe.roullier at foss.st.com>
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Rob Herring <robh at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: kernel at dh-electronics.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
---
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index 42995a8f5034c..9c7cf8f3c3e8b 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -157,16 +157,16 @@ eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
 				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
 				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
 				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
 				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
 				 <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
 				 <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
 		};
-- 
2.43.0