(subset) [PATCH 0/3] cpufreq: sun50i: add Allwinner H700 speed bin and additional OPPs
Philippe Simons
simons.philippe at gmail.com
Tue Jun 25 08:21:22 PDT 2024
I made some more tests, and it seems the schedutil governors is hanging.
I don't have the technical knowledge to find why or where, but I wanted
to report it here.
Others cpu_freq governors are working fine (so far).
Philippe
On 22/06/24 17:17, Chen-Yu Tsai wrote:
> On Fri, 07 Jun 2024 21:20:32 +1200, Ryan Walklin wrote:
>> Support for the Allwinner H618, H618 and H700 was added to the sun50i cpufreq-nvmem driver recently [1] however at the time some operating points supported by the H700 and in use in vendor BSPs were found to be unstable during testing, so the H700 speed bin was not included in the mainline driver.
>>
>> Retesting with kernel 6.10rc2 (which carries subsequent fixes for the driver) shows stable operation with these additional OPPs.
>>
>> This patchset adds the H700 speedbin index, enables the additional operating points for the H700 in the H616 OPP table, and enables DVFS support for the Anbernic REG35XX handheld devices, which are the only mainline-supported devices currently using the H700.
>>
>> Regards,
>>
>> [...]
> Applied to sunxi/dt-for-6.11 in sunxi/linux.git, thanks!
>
> [2/3] arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
> https://git.kernel.org/sunxi/linux/c/b05f15d0fc15
> [3/3] arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
> https://git.kernel.org/sunxi/linux/c/e1e61fe3452d
>
> Best regards,
More information about the linux-arm-kernel
mailing list