(subset) [PATCH 0/3] cpufreq: sun50i: add Allwinner H700 speed bin and additional OPPs

[Chen-Yu Tsai]

On Fri, 07 Jun 2024 21:20:32 +1200, Ryan Walklin wrote:
> Support for the Allwinner H618, H618 and H700 was added to the sun50i cpufreq-nvmem driver recently [1] however at the time some operating points supported by the H700 and in use in vendor BSPs were found to be unstable during testing, so the H700 speed bin was not included in the mainline driver.
> 
> Retesting with kernel 6.10rc2 (which carries subsequent fixes for the driver) shows stable operation with these additional OPPs.
> 
> This patchset adds the H700 speedbin index, enables the additional operating points for the H700 in the H616 OPP table, and enables DVFS support for the Anbernic REG35XX handheld devices, which are the only mainline-supported devices currently using the H700.
> 
> Regards,
> 
> [...]

Applied to sunxi/dt-for-6.11 in sunxi/linux.git, thanks!

[2/3] arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
      https://git.kernel.org/sunxi/linux/c/b05f15d0fc15
[3/3] arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
      https://git.kernel.org/sunxi/linux/c/e1e61fe3452d

Best regards,
-- 
Chen-Yu Tsai <wens at csie.org>