[PATCH 1/3] cpufreq: sun50i: add Allwinner H700 speed bin

[Viresh Kumar]

On 19-06-24, 01:00, Andre Przywara wrote:
> On Fri,  7 Jun 2024 21:20:33 +1200
> Ryan Walklin <ryan at testtoast.com> wrote:
> 
> > Support for the Allwinner H618, H618 and H700 was added to the sun50i
> > cpufreq-nvmem driver recently [1] however at the time some operating
> > points supported by the H700 (1.008, 1.032 and 1.512 GHz) and in use by
> > vendor BSPs were found to be unstable during testing, so the H700 speed
> > bin and  the 1.032 GHz OPP were not included in the mainline driver.
> > 
> > Retesting with kernel 6.10rc2 (which carries additional fixes for the
> > driver) now shows stable operation with these points.
> > 
> > Add the H700 speed bin to the driver.
> > 
> > Signed-off-by: Ryan Walklin <ryan at testtoast.com>
> 
> Yes, 0x6c00 is the value for the H700 SoCs in the devices we have seen:
> 
> Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Applied. Thanks.

-- 
viresh