[PATCH 1/3] cpufreq: sun50i: add Allwinner H700 speed bin

[Andre Przywara]

On Fri,  7 Jun 2024 21:20:33 +1200
Ryan Walklin <ryan at testtoast.com> wrote:

> Support for the Allwinner H618, H618 and H700 was added to the sun50i
> cpufreq-nvmem driver recently [1] however at the time some operating
> points supported by the H700 (1.008, 1.032 and 1.512 GHz) and in use by
> vendor BSPs were found to be unstable during testing, so the H700 speed
> bin and  the 1.032 GHz OPP were not included in the mainline driver.
> 
> Retesting with kernel 6.10rc2 (which carries additional fixes for the
> driver) now shows stable operation with these points.
> 
> Add the H700 speed bin to the driver.
> 
> Signed-off-by: Ryan Walklin <ryan at testtoast.com>

Yes, 0x6c00 is the value for the H700 SoCs in the devices we have seen:

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Thanks,
Andre

> --
> [1] https://lore.kernel.org/linux-sunxi/20240418154408.1740047-1-andre.przywara@arm.com
> ---
>  drivers/cpufreq/sun50i-cpufreq-nvmem.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
> index 0b882765cd66f..969f22aadd950 100644
> --- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
> @@ -91,6 +91,9 @@ static u32 sun50i_h616_efuse_xlate(u32 speedbin)
>  	case 0x5d00:
>  		value = 0;
>  		break;
> +	case 0x6c00:
> +		value = 5;
> +		break;
>  	default:
>  		pr_warn("sun50i-cpufreq-nvmem: unknown speed bin 0x%x, using default bin 0\n",
>  			speedbin & 0xffff);