[RFC V2 1/4] dt-bindings: firmware: Add support for QCOM Vendor Protocol
Sibi Sankar
quic_sibis at quicinc.com
Fri Jun 14 13:30:12 PDT 2024
On 6/14/24 01:06, Rob Herring wrote:
> On Thu, Jun 13, 2024 at 12:00:28AM +0530, Sibi Sankar wrote:
>> Document the SCMI QCOM Vendor protocol v1.0 bindings and the various memory
>> buses that can be monitored and scaled by memory latency governor hosted
>> on it.
>>
Hey Rob,
Thanks for taking time to review the series :)
>> Signed-off-by: Sibi Sankar <quic_sibis at quicinc.com>
>> ---
>>
>> v1:
>> * Add missing bindings for the protocol. [Konrad/Dmitry]
>> * Use alternate bindings. [Dmitry/Konrad]
>>
>> .../bindings/firmware/arm,scmi.yaml | 21 ++
>> .../bindings/soc/qcom/qcom,scmi-memlat.yaml | 243 ++++++++++++++++++
>> include/dt-bindings/soc/qcom,scmi-vendor.h | 22 ++
>> 3 files changed, 286 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml
>> create mode 100644 include/dt-bindings/soc/qcom,scmi-vendor.h
>>
>> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>> index 7de2c29606e5..21e4da53d02c 100644
>> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>> @@ -278,6 +278,27 @@ properties:
>> required:
>> - reg
>>
>> + protocol at 80:
>> + $ref: '#/$defs/protocol-node'
>> + unevaluatedProperties: false
>> +
>> + properties:
>> + reg:
>> + const: 0x80
>> +
>> + memlat-dvfs:
>
> I don't see the purpose of this container node.
Thanks, looks like I took a shortcut to show that the memory nodes
are logically placed with this abstraction. I'll should be able to
get it removed and achieve the same functionality.
>
>> + type: object
>> + additionalProperties: false
>> + description:
>> + The list of all memory buses that can be monitored and scaled by the
>> + memory latency governor running on the SCMI controller.
>> +
>> + patternProperties:
>> + '^memory-[0-9]$':
>> + type: object
>> + $ref: /schemas/soc/qcom/qcom,scmi-memlat.yaml#
>
> This schema needs to be at the level of the protocol node. See the i.MX
> SCMI pinctrl patches for more details on what it should look like.
Thanks will take a look at that.
>
>> + unevaluatedProperties: false
>> +
>> additionalProperties: false
>>
>> $defs:
>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml
>> new file mode 100644
>> index 000000000000..c6e3d163c4a3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml
>> @@ -0,0 +1,243 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/soc/qcom/qcom,scmi-memlat.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm SCMI Memory Bus nodes
>> +
>> +maintainers:
>> + - Sibi Sankar <quic_sibis at quicinc.com>
>> +
>> +description: |
>
> Doesn't need '|' if no formatting.
ack
>
>> + This binding describes the various memory buses that can be monitored and scaled
>> + by memory latency governor running on the CPU Control Processor (SCMI controller).
>> +
>> +properties:
>> + qcom,memory-type:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 1, 2]
>> + description:
>
> Needs a '|' if you want your formatting preserved.
ack
>
>> + Memory Bus Identifier
>> + 0 = QCOM_MEM_TYPE_DDR
>> + 1 = QCOM_MEM_TYPE_LLCC
>> + 2 = QCOM_MEM_TYPE_DDR_QOS
>> +
>> + freq-table-hz:
>> + items:
>> + items:
>> + - description: Minimum frequency of the memory bus in Hz
>> + - description: Maximum frequency of the memory bus in Hz
>> +
>> +patternProperties:
>> + '^monitor-[0-9]$':
>> + type: object
>> + unevaluatedProperties: false
>> + description:
>> + The list of all monitors detecting the memory latency bound workloads using
>> + various counters.
>> +
>> + properties:
>> + qcom,compute-type:
>> + description:
>> + Monitors of type compute perform bus dvfs based on a rudimentary CPU
>> + frequency to memory frequency map.
>> + type: boolean
>> +
>> + qcom,ipm-ceil:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Monitors having this property perform bus dvfs based on the same
>> + rudimentary table but the scaling is performed only if the calculated
>> + IPM (Instruction Per Misses) exceeds the given ceiling.
>> +
>> + qcom,cpulist:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + description:
>> + List of phandles to the CPUs nodes whose frequency and IPM are to be
>> + monitored.
>
> We have a standard property for this: cpus
will use ^^ in the next re-spin
>
>> +
>> + operating-points-v2: true
>> + opp-table:
>> + type: object
>> +
>> + required:
>> + - qcom,cpulist
>> + - operating-points-v2
>> + - opp-table
>> +
>
>> + allOf:
>> + - if:
>> + properties:
>> + qcom,compute-type: false
>> + then:
>> + required:
>> + - qcom,ipm-ceil
>> +
>> + - if:
>> + properties:
>> + qcom,ipm-ceil: false
>> + then:
>> + required:
>> + - qcom,compute-type
>
> Isn't all this just:
>
> oneOf:
> - required: [ qcom,compute-type ]
> - required: [ qcom,ipm-ceil ]
ack, will use ^^ in the next re-spin.
-Sibi
>
>
>> +
>> +required:
>> + - qcom,memory-type
>> + - freq-table-hz
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/soc/qcom,scmi-vendor.h>
>> +
>> + firmware {
>> + scmi {
>> + compatible = "arm,scmi";
>> + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>;
>> + mbox-names = "tx", "rx";
>> + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + protocol at 80 {
>> + reg = <0x80>;
>> +
>> + memlat-dvfs {
>> + memory-0 {
>> + qcom,memory-type = <QCOM_MEM_TYPE_DDR>;
>> + freq-table-hz = /bits/ 64 <200000000 4224000000>;
>> +
>> + monitor-0 {
>> + qcom,ipm-ceil = <20000000>;
>> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7
>> + &CPU8 &CPU9 &CPU10 &CPU11>;
>> + operating-points-v2 = <&memory0_monitor0_opp_table>;
>> +
>> + memory0_monitor0_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-999000000 {
>> + opp-hz = /bits/ 64 <999000000 547000000>;
>> + };
>> +
>> + opp-1440000000 {
>> + opp-hz = /bits/ 64 <1440000000 768000000>;
>> + };
>> +
>> + opp-1671000000 {
>> + opp-hz = /bits/ 64 <1671000000 1555000000>;
>> + };
>> +
>> + opp-2189000000 {
>> + opp-hz = /bits/ 64 <2189000000 2092000000>;
>> + };
>> +
>> + opp-2516000000 {
>> + opp-hz = /bits/ 64 <2516000000 3187000000>;
>> + };
>> +
>> + opp-3860000000 {
>> + opp-hz = /bits/ 64 <3860000000 4224000000>;
>> + };
>> + };
>> + };
>> +
>> + monitor-1 {
>> + qcom,compute-type;
>> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7
>> + &CPU8 &CPU9 &CPU10 &CPU11>;
>> + operating-points-v2 = <&memory0_monitor1_opp_table>;
>> +
>> + memory0_monitor1_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-1440000000 {
>> + opp-hz = /bits/ 64 <1440000000 200000000>;
>> + };
>> +
>> + opp-2189000000 {
>> + opp-hz = /bits/ 64 <2189000000 768000000>;
>> + };
>> +
>> + opp-2516000000 {
>> + opp-hz = /bits/ 64 <2516000000 1555000000>;
>> + };
>> +
>> + opp-3860000000 {
>> + opp-hz = /bits/ 64 <3860000000 4224000000>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + memory-1 {
>> + qcom,memory-type = <QCOM_MEM_TYPE_LLCC>;
>> + freq-table-hz = /bits/ 64 <300000000 1067000000>;
>> +
>> + monitor-0 {
>> + qcom,ipm-ceil = <20000000>;
>> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7
>> + &CPU8 &CPU9 &CPU10 &CPU11>;
>> + operating-points-v2 = <&memory1_monitor0_opp_table>;
>> +
>> + memory1_monitor0_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-999000000 {
>> + opp-hz = /bits/ 64 <999000000 300000000>;
>> + };
>> +
>> + opp-1440000000 {
>> + opp-hz = /bits/ 64 <1440000000 466000000>;
>> + };
>> +
>> + opp-1671000000 {
>> + opp-hz = /bits/ 64 <1671000000 600000000>;
>> + };
>> +
>> + opp-2189000000 {
>> + opp-hz = /bits/ 64 <2189000000 806000000>;
>> + };
>> +
>> + opp-2516000000 {
>> + opp-hz = /bits/ 64 <2516000000 933000000>;
>> + };
>> +
>> + opp-3860000000 {
>> + opp-hz = /bits/ 64 <3860000000 1066000000>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + memory-2 {
>> + qcom,memory-type = <QCOM_MEM_TYPE_DDR_QOS>;
>> + freq-table-hz = /bits/ 64 <QCOM_DDR_LEVEL_AUTO QCOM_DDR_LEVEL_PERF>;
>> +
>> + monitor-0 {
>> + qcom,ipm-ceil = <20000000>;
>> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7
>> + &CPU8 &CPU9 &CPU10 &CPU11>;
>> + operating-points-v2 = <&memory2_monitor0_opp_table>;
>> +
>> + memory2_monitor0_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-2189000000 {
>> + opp-hz = /bits/ 64 <2189000000>;
>> + opp-level = <QCOM_DDR_LEVEL_AUTO>;
>> + };
>> +
>> + opp-3860000000 {
>> + opp-hz = /bits/ 64 <3860000000>;
>> + opp-level = <QCOM_DDR_LEVEL_PERF>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>> diff --git a/include/dt-bindings/soc/qcom,scmi-vendor.h b/include/dt-bindings/soc/qcom,scmi-vendor.h
>> new file mode 100644
>> index 000000000000..7ae8d8d5623b
>> --- /dev/null
>> +++ b/include/dt-bindings/soc/qcom,scmi-vendor.h
>> @@ -0,0 +1,22 @@
>> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
>> +/*
>> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H
>> +#define __DT_BINDINGS_QCOM_SCMI_VENDOR
>> +
>> +/* Memory IDs */
>> +#define QCOM_MEM_TYPE_DDR 0x0
>> +#define QCOM_MEM_TYPE_LLCC 0x1
>> +#define QCOM_MEM_TYPE_DDR_QOS 0x2
>> +
>> +/*
>> + * QCOM_MEM_TYPE_DDR_QOS supports the following states.
>> + *
>> + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled
>> + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled
>> + */
>> +#define QCOM_DDR_LEVEL_AUTO 0x0
>> +#define QCOM_DDR_LEVEL_PERF 0x1
>> +
>> +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */
>> --
>> 2.34.1
>>
More information about the linux-arm-kernel
mailing list