[PATCH v2 3/7] dt-bindings: reset: Add binding constants for BLZP1600
Niko Pasaloukos
nikolaos.pasaloukos at blaize.com
Wed Apr 24 06:32:33 PDT 2024
Add SCMI reset numbers according to the Blaize BLZP1600 SoC
hardware specifications.
Reviewed-by: James Cowgill <james.cowgill at blaize.com>
Reviewed-by: Matt Redfearn <matt.redfearn at blaize.com>
Reviewed-by: Neil Jones <neil.jones at blaize.com>
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos at blaize.com>
---
.../dt-bindings/reset/blaize,blzp1600-reset.h | 84 +++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 include/dt-bindings/reset/blaize,blzp1600-reset.h
diff --git a/include/dt-bindings/reset/blaize,blzp1600-reset.h b/include/dt-bindings/reset/blaize,blzp1600-reset.h
new file mode 100644
index 000000000000..c500c2b0690c
--- /dev/null
+++ b/include/dt-bindings/reset/blaize,blzp1600-reset.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023, Blaize, Inc.
+ */
+
+#ifndef DT_BINDING_RESET_BLZP1600_H
+#define DT_BINDING_RESET_BLZP1600_H
+
+/* ARM SCMI resets */
+
+/* BLZP1600 reset numbers as defined in the hardware architecture */
+
+#define BLZP1600_A53_C0_HARD_RST 0
+#define BLZP1600_A53_C0_SOFT_RST 1
+#define BLZP1600_A53_C1_HARD_RST 2
+#define BLZP1600_A53_C1_SOFT_RST 3
+#define BLZP1600_A53_L2_CACHE_RST 4
+#define BLZP1600_A53_DBG_RST 5
+#define BLZP1600_GIC_RST 6
+#define BLZP1600_CRYPTO_RST 7
+/* reset 8 invalid */
+#define BLZP1600_GSP_RST 9
+#define BLZP1600_DRAM_A_SYS_RST 10
+#define BLZP1600_DRAM_A_DDRC_RST 11
+#define BLZP1600_DRAM_A_PRST 12
+#define BLZP1600_DRAM_A_ARST 13
+#define BLZP1600_DRAM_A_PHY_RST 14
+#define BLZP1600_DRAM_A_PWRON_RST 15
+#define BLZP1600_DRAM_A_PHY_PRST 16
+#define BLZP1600_DRAM_B_SYS_RST 17
+#define BLZP1600_DRAM_B_DDRC_RST 18
+#define BLZP1600_DRAM_B_PRST 19
+#define BLZP1600_DRAM_B_ARST 20
+#define BLZP1600_DRAM_B_PHY_RST 21
+#define BLZP1600_DRAM_B_PWRON_RST 22
+#define BLZP1600_DRAM_B_PHY_PRST 23
+#define BLZP1600_USB_RST 24
+#define BLZP1600_USB_PHY_RST 25
+#define BLZP1600_CAN0_RST 26
+#define BLZP1600_CAN1_RST 27
+#define BLZP1600_CAN2_RST 28
+#define BLZP1600_ETH_MAC_RST 29
+#define BLZP1600_SDIO0_RST 30
+#define BLZP1600_SDIO1_RST 31
+#define BLZP1600_SDIO2_RST 32
+/* reset 33 invalid */
+#define BLZP1600_SD_CARD_RST 34
+#define BLZP1600_CSI0_CTRL_RST 35
+#define BLZP1600_CSI0_VDMA_RST 36
+#define BLZP1600_CSI1_CTRL_RST 37
+#define BLZP1600_CSI1_VDMA_RST 38
+#define BLZP1600_CSI2_CTRL_RST 39
+#define BLZP1600_CSI2_VDMA_RST 40
+#define BLZP1600_CSI3_CTRL_RST 41
+#define BLZP1600_CSI3_VDMA_RST 42
+#define BLZP1600_CSID_CTRL_RST 43
+#define BLZP1600_CSID_VDMA_RST 44
+#define BLZP1600_DSI_CTRL_RST 45
+#define BLZP1600_DSI_VDMA_RST 46
+/* resets 47-48 invalid */
+#define BLZP1600_DMA_RST 49
+#define BLZP1600_QSPI_PRST 50
+#define BLZP1600_QSPI_RST 51
+#define BLZP1600_I2S_TX_RST 52
+#define BLZP1600_I2S_RX_RST 53
+#define BLZP1600_I2C0_RST 54
+#define BLZP1600_I2C1_RST 55
+#define BLZP1600_I2C2_RST 56
+#define BLZP1600_I2C3_RST 57
+#define BLZP1600_I2C4_RST 58
+#define BLZP1600_UART0_RST 59
+#define BLZP1600_UART1_RST 60
+#define BLZP1600_SPIS_PRST 61
+#define BLZP1600_SPIS_RST 62
+#define BLZP1600_TIMER_RST 63
+#define BLZP1600_TSENSOR_RST 64
+#define BLZP1600_VIDEO_E_RST 65
+#define BLZP1600_VIDEO_E_REORDER_RST 66
+/* reset 67 invalid */
+#define BLZP1600_VIDEO_D_RST 68
+#define BLZP1600_VIDEO_D_REORDER_RST 69
+#define BLZP1600_VIDEO_D_L2_RST 70
+
+#endif
--
2.34.1
More information about the linux-arm-kernel
mailing list