[PATCH v4 1/2] pwm: meson: Add support for Amlogic S4 PWM

[Junyi Zhao]

On 2024/4/24 18:32, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> On Wed 24 Apr 2024 at 18:28, Kelvin Zhang via B4 Relay <devnull+kelvin.zhang.amlogic.com at kernel.org> wrote:
> 
>> From: Junyi Zhao <junyi.zhao at amlogic.com>
>>
>> This patch adds support for Amlogic S4 PWM.
>>
>> Signed-off-by: Junyi Zhao <junyi.zhao at amlogic.com>
>> Signed-off-by: Kelvin Zhang <kelvin.zhang at amlogic.com>
>> ---
>>   drivers/pwm/pwm-meson.c | 37 +++++++++++++++++++++++++++++++++++++
>>   1 file changed, 37 insertions(+)
>>
>> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
>> index ea96c5973488..6abc823745e4 100644
>> --- a/drivers/pwm/pwm-meson.c
>> +++ b/drivers/pwm/pwm-meson.c
>> @@ -462,6 +462,35 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>>        return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>>   }
>>
>> +static int meson_pwm_init_channels_meson_s4(struct pwm_chip *chip)
>> +{
>> +     int i, ret;
>> +     struct device *dev = pwmchip_parent(chip);
>> +     struct device_node *np = dev->of_node;
>> +     struct meson_pwm *meson = to_meson_pwm(chip);
>> +     struct meson_pwm_channel *channel;
>> +
>> +     for (i = 0; i < MESON_NUM_PWMS; i++) {
>> +             channel = &meson->channels[i];
>> +             channel->clk = of_clk_get(np, i);
>> +             if (IS_ERR(channel->clk)) {
>> +                     ret = PTR_ERR(channel->clk);
>> +                     dev_err_probe(dev, ret, "Failed to get clk\n");
>> +                     goto err;
>> +             }
>> +     }
>> +
>> +     return 0;
>> +
>> +err:
>> +     while (--i >= 0) {
>> +             channel = &meson->channels[i];
>> +             clk_put(channel->clk);
> 
> Fine on error but leaks on module unload.
> 
> Same as George,
> 
> Add the devm variant of of_clk_get() if you must.
> Use devm_add_action_or_reset() otherwise
Hi jerom，but we have discussed before.devm variant such as follows：
devm_clk_get_enable(struct device * dev, char * id)
struct clk *devm_clk_get(struct device *dev, const char *id)
struct clk *devm_clk_get_optional(struct device *dev, const char *id)

after i check api parm ,these api's 2rd parm "id" is string not index.
because dt binding have no name property. could we use devm？
> 
> Could please synchronize this series with George and deal with all the
> supported SoCs ? a1, s4, t7, c3 ...
> 
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>>   static const struct meson_pwm_data pwm_meson8b_data = {
>>        .parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
>>        .channels_init = meson_pwm_init_channels_meson8b_legacy,
>> @@ -500,6 +529,10 @@ static const struct meson_pwm_data pwm_meson8_v2_data = {
>>        .channels_init = meson_pwm_init_channels_meson8b_v2,
>>   };
>>
>> +static const struct meson_pwm_data pwm_meson_s4_data = {
>> +     .channels_init = meson_pwm_init_channels_meson_s4,
>> +};
>> +
>>   static const struct of_device_id meson_pwm_matches[] = {
>>        {
>>                .compatible = "amlogic,meson8-pwm-v2",
>> @@ -538,6 +571,10 @@ static const struct of_device_id meson_pwm_matches[] = {
>>                .compatible = "amlogic,meson-g12a-ao-pwm-cd",
>>                .data = &pwm_g12a_ao_cd_data
>>        },
>> +     {
>> +             .compatible = "amlogic,meson-s4-pwm",
>> +             .data = &pwm_meson_s4_data
>> +     },
>>        {},
>>   };
>>   MODULE_DEVICE_TABLE(of, meson_pwm_matches);
> 
> 
> --
> Jerome