[PATCH v4 1/2] pwm: meson: Add support for Amlogic S4 PWM

Jerome Brunet jbrunet at baylibre.com
Wed Apr 24 03:32:36 PDT 2024


On Wed 24 Apr 2024 at 18:28, Kelvin Zhang via B4 Relay <devnull+kelvin.zhang.amlogic.com at kernel.org> wrote:

> From: Junyi Zhao <junyi.zhao at amlogic.com>
>
> This patch adds support for Amlogic S4 PWM.
>
> Signed-off-by: Junyi Zhao <junyi.zhao at amlogic.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang at amlogic.com>
> ---
>  drivers/pwm/pwm-meson.c | 37 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index ea96c5973488..6abc823745e4 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -462,6 +462,35 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>  	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>  }
>  
> +static int meson_pwm_init_channels_meson_s4(struct pwm_chip *chip)
> +{
> +	int i, ret;
> +	struct device *dev = pwmchip_parent(chip);
> +	struct device_node *np = dev->of_node;
> +	struct meson_pwm *meson = to_meson_pwm(chip);
> +	struct meson_pwm_channel *channel;
> +
> +	for (i = 0; i < MESON_NUM_PWMS; i++) {
> +		channel = &meson->channels[i];
> +		channel->clk = of_clk_get(np, i);
> +		if (IS_ERR(channel->clk)) {
> +			ret = PTR_ERR(channel->clk);
> +			dev_err_probe(dev, ret, "Failed to get clk\n");
> +			goto err;
> +		}
> +	}
> +
> +	return 0;
> +
> +err:
> +	while (--i >= 0) {
> +		channel = &meson->channels[i];
> +		clk_put(channel->clk);

Fine on error but leaks on module unload.

Same as George,

Add the devm variant of of_clk_get() if you must.
Use devm_add_action_or_reset() otherwise

Could please synchronize this series with George and deal with all the
supported SoCs ? a1, s4, t7, c3 ...

> +	}
> +
> +	return ret;
> +}
> +
>  static const struct meson_pwm_data pwm_meson8b_data = {
>  	.parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
>  	.channels_init = meson_pwm_init_channels_meson8b_legacy,
> @@ -500,6 +529,10 @@ static const struct meson_pwm_data pwm_meson8_v2_data = {
>  	.channels_init = meson_pwm_init_channels_meson8b_v2,
>  };
>  
> +static const struct meson_pwm_data pwm_meson_s4_data = {
> +	.channels_init = meson_pwm_init_channels_meson_s4,
> +};
> +
>  static const struct of_device_id meson_pwm_matches[] = {
>  	{
>  		.compatible = "amlogic,meson8-pwm-v2",
> @@ -538,6 +571,10 @@ static const struct of_device_id meson_pwm_matches[] = {
>  		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
>  		.data = &pwm_g12a_ao_cd_data
>  	},
> +	{
> +		.compatible = "amlogic,meson-s4-pwm",
> +		.data = &pwm_meson_s4_data
> +	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, meson_pwm_matches);


-- 
Jerome



More information about the linux-arm-kernel mailing list