[PATCH 1/4] dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Aiuto]

i.Core MX93 is a NXP i.MX93 based EDIMM SoM by Engicam.

EDIMM 2.0 Starter Kit is an EDIMM 2.0 Form Factor Capacitive
Evaluation Board by Engicam.

i.Core MX93 needs to be mounted on top of EDIMM 2.0 Starter Kit
to get the full i.Core MX93 EDIMM 2.0 Starter Kit board.

Add bindings for this board.

Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Mirko Ardinghi <mirko.ardinghi at engicam.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto at engicam.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0027201e19f8..b497a01c7418 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1265,6 +1265,13 @@ properties:
               - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
           - const: fsl,imx93
 
+      - description: Engicam i.Core MX93 based Boards
+        items:
+          - enum:
+              - engicam,icore-mx93-edimm2         # i.MX93 Engicam i.Core MX93 EDIMM 2.0 Starter Kit
+          - const: engicam,icore-mx93             # i.MX93 Engicam i.Core MX93 Som
+          - const: fsl,imx93
+
       - description: i.MXRT1050 based Boards
         items:
           - enum:
-- 
2.34.1