[PATCH 0/4] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board

[Fabio Aiuto]

Hello all,

this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.

If I'm not wrong the change I propose on patch 2 has been already
queued up in regulator subsystem, anyway I put it here to satisfy
requirements for dt-bindings patch submission (if I don't do that
checkpatch complains about that).

Thanks in advance,

fabio

Fabio Aiuto (4):
  dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
  regulator: dt-bindings: pca9450: add pca9451a support
  arm64: dts: imx93: add Engicam i.Core MX93 SoM
  arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 .../regulator/nxp,pca9450-regulator.yaml      |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 356 ++++++++++++++++++
 .../boot/dts/freescale/imx93-icore-mx93.dtsi  | 271 +++++++++++++
 5 files changed, 636 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi

-- 
2.34.1