[PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes

[claudiu beznea]

On 26.07.2023 21:33, Conor Dooley wrote:
> On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
>> Dear Community,
>>
>>> Without this change the KSZ9477-EVB board hangs just after passing
>>> execution flow from u-boot to Linux kernel.
>>>
>>> This code has been copied from at91-sama5d3_xplained.dts.
>>>
>>> Test setup: Linux 6.5-rc1
>>> Config:     arch/arm/configs/sama5_defconfig
>>> Toolchain:  gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>>>
>>> Signed-off-by: Lukasz Majewski <lukma at denx.de>
>>> ---
>>>   .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts  | 12
>>> ++++++++++++ 1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
>>> 14af1fd6d247..99cd6d15998b 100644 ---
>>> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
>>> +162,18 @@ };
>>>   };
>>>   
>>> +&tcb0 {
>>> +	timer0: timer at 0 {
>>> +		compatible = "atmel,tcb-timer";
>>> +		reg = <0>;
>>> +	};
>>> +
>>> +	timer1: timer at 1 {
>>> +		compatible = "atmel,tcb-timer";
>>> +		reg = <1>;
>>> +	};
>>> +};
>>> +
>>>   &usb0 {
>>>   	pinctrl-names = "default";
>>>   	pinctrl-0 = <&pinctrl_usba_vbus>;
>>
>> Gentle ping on this fix ...
> 
> Claudiu has left Microchip, so things might've got a bit lost on the
> way. I've added his new address, Claudiu, will you take a look/pick this
> up please? I can also do it if that is easier for you.

It's on my list.

Thanks,
Claudiu

> 
> Thanks,
> Conor.
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel