[PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes

[Conor Dooley]

On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
> Dear Community,
> 
> > Without this change the KSZ9477-EVB board hangs just after passing
> > execution flow from u-boot to Linux kernel.
> > 
> > This code has been copied from at91-sama5d3_xplained.dts.
> > 
> > Test setup: Linux 6.5-rc1
> > Config:     arch/arm/configs/sama5_defconfig
> > Toolchain:  gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
> > 
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > ---
> >  .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts  | 12
> > ++++++++++++ 1 file changed, 12 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
> > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
> > 14af1fd6d247..99cd6d15998b 100644 ---
> > a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
> > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
> > +162,18 @@ };
> >  };
> >  
> > +&tcb0 {
> > +	timer0: timer at 0 {
> > +		compatible = "atmel,tcb-timer";
> > +		reg = <0>;
> > +	};
> > +
> > +	timer1: timer at 1 {
> > +		compatible = "atmel,tcb-timer";
> > +		reg = <1>;
> > +	};
> > +};
> > +
> >  &usb0 {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&pinctrl_usba_vbus>;
> 
> Gentle ping on this fix ...

Claudiu has left Microchip, so things might've got a bit lost on the
way. I've added his new address, Claudiu, will you take a look/pick this
up please? I can also do it if that is easier for you.

Thanks,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230726/c34d9610/attachment.sig>