[PATCH v2 2/2] media: stm32: dcmi: only call s_stream on the source subdev

[Hugues FRUCHET]

Reviewed-by: Hugues FRUCHET <hugues.fruchet at foss.st.com>

On 7/21/23 14:03, Alain Volmat wrote:
> Avoid calling s_stream on each subdev until reaching the sensor and
> instead call s_stream on the source subdev only (which will in turn
> do whatever needed to start the stream).
> 
> Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> ---
>   drivers/media/platform/st/stm32/stm32-dcmi.c | 63 +++++---------------
>   1 file changed, 14 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/media/platform/st/stm32/stm32-dcmi.c b/drivers/media/platform/st/stm32/stm32-dcmi.c
> index dad6e22e4ce4..ac8a5031dce6 100644
> --- a/drivers/media/platform/st/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/st/stm32/stm32-dcmi.c
> @@ -134,6 +134,7 @@ struct stm32_dcmi {
>   	struct video_device		*vdev;
>   	struct v4l2_async_notifier	notifier;
>   	struct v4l2_subdev		*source;
> +	struct v4l2_subdev		*s_subdev;
>   	struct v4l2_format		fmt;
>   	struct v4l2_rect		crop;
>   	bool				do_crop;
> @@ -692,51 +693,6 @@ static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi,
>   	return 0;
>   }
>   
> -static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state)
> -{
> -	struct media_entity *entity = &dcmi->vdev->entity;
> -	struct v4l2_subdev *subdev;
> -	struct media_pad *pad;
> -	int ret;
> -
> -	/* Start/stop all entities within pipeline */
> -	while (1) {
> -		pad = &entity->pads[0];
> -		if (!(pad->flags & MEDIA_PAD_FL_SINK))
> -			break;
> -
> -		pad = media_pad_remote_pad_first(pad);
> -		if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> -			break;
> -
> -		entity = pad->entity;
> -		subdev = media_entity_to_v4l2_subdev(entity);
> -
> -		ret = v4l2_subdev_call(subdev, video, s_stream, state);
> -		if (ret < 0 && ret != -ENOIOCTLCMD) {
> -			dev_err(dcmi->dev, "%s: \"%s\" failed to %s streaming (%d)\n",
> -				__func__, subdev->name,
> -				state ? "start" : "stop", ret);
> -			return ret;
> -		}
> -
> -		dev_dbg(dcmi->dev, "\"%s\" is %s\n",
> -			subdev->name, state ? "started" : "stopped");
> -	}
> -
> -	return 0;
> -}
> -
> -static int dcmi_pipeline_start(struct stm32_dcmi *dcmi)
> -{
> -	return dcmi_pipeline_s_stream(dcmi, 1);
> -}
> -
> -static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi)
> -{
> -	dcmi_pipeline_s_stream(dcmi, 0);
> -}
> -
>   static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>   {
>   	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> @@ -758,9 +714,12 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>   		goto err_pm_put;
>   	}
>   
> -	ret = dcmi_pipeline_start(dcmi);
> -	if (ret)
> +	ret = v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 1);
> +	if (ret < 0) {
> +		dev_err(dcmi->dev, "%s: Failed to start source subdev, error (%d)\n",
> +			__func__, ret);
>   		goto err_media_pipeline_stop;
> +	}
>   
>   	spin_lock_irq(&dcmi->irqlock);
>   
> @@ -862,7 +821,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>   	return 0;
>   
>   err_pipeline_stop:
> -	dcmi_pipeline_stop(dcmi);
> +	v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 0);
>   
>   err_media_pipeline_stop:
>   	video_device_pipeline_stop(dcmi->vdev);
> @@ -889,8 +848,12 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
>   {
>   	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
>   	struct dcmi_buf *buf, *node;
> +	int ret;
>   
> -	dcmi_pipeline_stop(dcmi);
> +	ret = v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 0);
> +	if (ret < 0)
> +		dev_err(dcmi->dev, "%s: Failed to stop source subdev, error (%d)\n",
> +			__func__, ret);
>   
>   	video_device_pipeline_stop(dcmi->vdev);
>   
> @@ -1876,6 +1839,8 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
>   		dev_dbg(dcmi->dev, "DCMI is now linked to \"%s\"\n",
>   			subdev->name);
>   
> +	dcmi->s_subdev = subdev;
> +
>   	return ret;
>   }
>