[PATCH v2 2/2] media: stm32: dcmi: only call s_stream on the source subdev

[Alain Volmat]

Avoid calling s_stream on each subdev until reaching the sensor and
instead call s_stream on the source subdev only (which will in turn
do whatever needed to start the stream).

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 drivers/media/platform/st/stm32/stm32-dcmi.c | 63 +++++---------------
 1 file changed, 14 insertions(+), 49 deletions(-)

diff --git a/drivers/media/platform/st/stm32/stm32-dcmi.c b/drivers/media/platform/st/stm32/stm32-dcmi.c
index dad6e22e4ce4..ac8a5031dce6 100644
--- a/drivers/media/platform/st/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/st/stm32/stm32-dcmi.c
@@ -134,6 +134,7 @@ struct stm32_dcmi {
 	struct video_device		*vdev;
 	struct v4l2_async_notifier	notifier;
 	struct v4l2_subdev		*source;
+	struct v4l2_subdev		*s_subdev;
 	struct v4l2_format		fmt;
 	struct v4l2_rect		crop;
 	bool				do_crop;
@@ -692,51 +693,6 @@ static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi,
 	return 0;
 }
 
-static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state)
-{
-	struct media_entity *entity = &dcmi->vdev->entity;
-	struct v4l2_subdev *subdev;
-	struct media_pad *pad;
-	int ret;
-
-	/* Start/stop all entities within pipeline */
-	while (1) {
-		pad = &entity->pads[0];
-		if (!(pad->flags & MEDIA_PAD_FL_SINK))
-			break;
-
-		pad = media_pad_remote_pad_first(pad);
-		if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
-			break;
-
-		entity = pad->entity;
-		subdev = media_entity_to_v4l2_subdev(entity);
-
-		ret = v4l2_subdev_call(subdev, video, s_stream, state);
-		if (ret < 0 && ret != -ENOIOCTLCMD) {
-			dev_err(dcmi->dev, "%s: \"%s\" failed to %s streaming (%d)\n",
-				__func__, subdev->name,
-				state ? "start" : "stop", ret);
-			return ret;
-		}
-
-		dev_dbg(dcmi->dev, "\"%s\" is %s\n",
-			subdev->name, state ? "started" : "stopped");
-	}
-
-	return 0;
-}
-
-static int dcmi_pipeline_start(struct stm32_dcmi *dcmi)
-{
-	return dcmi_pipeline_s_stream(dcmi, 1);
-}
-
-static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi)
-{
-	dcmi_pipeline_s_stream(dcmi, 0);
-}
-
 static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
@@ -758,9 +714,12 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err_pm_put;
 	}
 
-	ret = dcmi_pipeline_start(dcmi);
-	if (ret)
+	ret = v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 1);
+	if (ret < 0) {
+		dev_err(dcmi->dev, "%s: Failed to start source subdev, error (%d)\n",
+			__func__, ret);
 		goto err_media_pipeline_stop;
+	}
 
 	spin_lock_irq(&dcmi->irqlock);
 
@@ -862,7 +821,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	return 0;
 
 err_pipeline_stop:
-	dcmi_pipeline_stop(dcmi);
+	v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 0);
 
 err_media_pipeline_stop:
 	video_device_pipeline_stop(dcmi->vdev);
@@ -889,8 +848,12 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
 {
 	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
 	struct dcmi_buf *buf, *node;
+	int ret;
 
-	dcmi_pipeline_stop(dcmi);
+	ret = v4l2_subdev_call(dcmi->s_subdev, video, s_stream, 0);
+	if (ret < 0)
+		dev_err(dcmi->dev, "%s: Failed to stop source subdev, error (%d)\n",
+			__func__, ret);
 
 	video_device_pipeline_stop(dcmi->vdev);
 
@@ -1876,6 +1839,8 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
 		dev_dbg(dcmi->dev, "DCMI is now linked to \"%s\"\n",
 			subdev->name);
 
+	dcmi->s_subdev = subdev;
+
 	return ret;
 }
 
-- 
2.25.1