[RESEND PATCH v12 3/3] perf tool: Add support for parsing HiSilicon PCIe Trace packet
Yicong Yang
yangyicong at huawei.com
Wed Sep 14 21:06:31 PDT 2022
On 2022/9/14 18:12, John Garry wrote:
> On 14/09/2022 08:59, Yicong Yang wrote:
>> From: Qi Liu <liuqi115 at huawei.com>
>>
>> Add support for using 'perf report --dump-raw-trace' to parse PTT packet.
>>
>> Example usage:
>>
>> Output will contain raw PTT data and its textual representation, such
>> as:
>>
>> 0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0
>> ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0
>> .
>> . ... HISI PTT data: size 4194304 bytes
>> . 00000000: 00 00 00 00 Prefix
>> . 00000004: 08 20 00 60 Header DW0
>> . 00000008: ff 02 00 01 Header DW1
>> . 0000000c: 20 08 00 00 Header DW2
>> . 00000010: 10 e7 44 ab Header DW3
>> . 00000014: 2a a8 1e 01 Time
>> . 00000020: 00 00 00 00 Prefix
>> . 00000024: 01 00 00 60 Header DW0
>> . 00000028: 0f 1e 00 01 Header DW1
>> . 0000002c: 04 00 00 00 Header DW2
>> . 00000030: 40 00 81 02 Header DW3
>> . 00000034: ee 02 00 00 Time
>> ....
>>
>> Signed-off-by: Qi Liu <liuqi115 at huawei.com>
>> Signed-off-by: Yicong Yang <yangyicong at hisilicon.com>
>> ---
>> tools/perf/util/Build | 2 +
>> tools/perf/util/auxtrace.c | 3 +
>> tools/perf/util/hisi-ptt-decoder/Build | 1 +
>> .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 164 +++++++++++++++
>> .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 31 +++
>> tools/perf/util/hisi-ptt.c | 192 ++++++++++++++++++
>> tools/perf/util/hisi-ptt.h | 3 +
>> 7 files changed, 396 insertions(+)
>> create mode 100644 tools/perf/util/hisi-ptt-decoder/Build
>> create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c
>> create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h
>> create mode 100644 tools/perf/util/hisi-ptt.c
>>
>> diff --git a/tools/perf/util/Build b/tools/perf/util/Build
>> index 9dfae1bda9cc..9bad8568071d 100644
>> --- a/tools/perf/util/Build
>> +++ b/tools/perf/util/Build
>> @@ -118,6 +118,8 @@ perf-$(CONFIG_AUXTRACE) += intel-pt.o
>> perf-$(CONFIG_AUXTRACE) += intel-bts.o
>> perf-$(CONFIG_AUXTRACE) += arm-spe.o
>> perf-$(CONFIG_AUXTRACE) += arm-spe-decoder/
>> +perf-$(CONFIG_AUXTRACE) += hisi-ptt.o
>> +perf-$(CONFIG_AUXTRACE) += hisi-ptt-decoder/
>> perf-$(CONFIG_AUXTRACE) += s390-cpumsf.o
>> ifdef CONFIG_LIBOPENCSD
>> diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c
>> index c30611d9ee99..e799c7314d39 100644
>> --- a/tools/perf/util/auxtrace.c
>> +++ b/tools/perf/util/auxtrace.c
>> @@ -51,6 +51,7 @@
>> #include "intel-pt.h"
>> #include "intel-bts.h"
>> #include "arm-spe.h"
>> +#include "hisi-ptt.h"
>> #include "s390-cpumsf.h"
>> #include "util/mmap.h"
>> @@ -1320,6 +1321,8 @@ int perf_event__process_auxtrace_info(struct perf_session *session,
>> err = s390_cpumsf_process_auxtrace_info(event, session);
>> break;
>> case PERF_AUXTRACE_HISI_PTT:
>> + err = hisi_ptt_process_auxtrace_info(event, session);
>> + break;
>> case PERF_AUXTRACE_UNKNOWN:
>> default:
>> return -EINVAL;
>> diff --git a/tools/perf/util/hisi-ptt-decoder/Build b/tools/perf/util/hisi-ptt-decoder/Build
>> new file mode 100644
>> index 000000000000..db3db8b75033
>> --- /dev/null
>> +++ b/tools/perf/util/hisi-ptt-decoder/Build
>> @@ -0,0 +1 @@
>> +perf-$(CONFIG_AUXTRACE) += hisi-ptt-pkt-decoder.o
>> diff --git a/tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c b/tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c
>> new file mode 100644
>> index 000000000000..dc8f19914628
>> --- /dev/null
>> +++ b/tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c
>> @@ -0,0 +1,164 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * HiSilicon PCIe Trace and Tuning (PTT) support
>> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
>> + */
>> +
>> +#include <stdlib.h>
>> +#include <stdio.h>
>> +#include <string.h>
>> +#include <endian.h>
>> +#include <byteswap.h>
>> +#include <linux/bitops.h>
>> +#include <stdarg.h>
>> +
>> +#include "../color.h"
>> +#include "hisi-ptt-pkt-decoder.h"
>> +
>> +/*
>> + * For 8DW format, the bit[31:11] of DW0 is always 0x1fffff, which can be
>> + * used to distinguish the data format.
>> + * 8DW format is like:
>> + * bits [ 31:11 ][ 10:0 ]
>> + * |---------------------------------------|-------------------|
>> + * DW0 [ 0x1fffff ][ Reserved (0x7ff) ]
>> + * DW1 [ Prefix ]
>> + * DW2 [ Header DW0 ]
>> + * DW3 [ Header DW1 ]
>> + * DW4 [ Header DW2 ]
>> + * DW5 [ Header DW3 ]
>> + * DW6 [ Reserved (0x0) ]
>> + * DW7 [ Time ]
>> + *
>> + * 4DW format is like:
>> + * bits [31:30] [ 29:25 ][24][23][22][21][ 20:11 ][ 10:0 ]
>> + * |-----|---------|---|---|---|---|-------------|-------------|
>> + * DW0 [ Fmt ][ Type ][T9][T8][TH][SO][ Length ][ Time ]
>> + * DW1 [ Header DW1 ]
>> + * DW2 [ Header DW2 ]
>> + * DW3 [ Header DW3 ]
>> + */
>> +
>> +enum hisi_ptt_8dw_pkt_field_type {
>> + HISI_PTT_8DW_RSV0,
>
> if this is defined according to HW value then better be explicit and declare the value
>
We use these enums to distinguish each DWords of the data, as defined above in the comments.
Do you mean the REV0 here is not accurate according to the above doc?
>> + HISI_PTT_8DW_PREFIX,
>> + HISI_PTT_8DW_HEAD0,
>> + HISI_PTT_8DW_HEAD1,
>> + HISI_PTT_8DW_HEAD2,
>> + HISI_PTT_8DW_HEAD3,
>> + HISI_PTT_8DW_RSV1,
>> + HISI_PTT_8DW_TIME,
>> + HISI_PTT_8DW_TYPE_MAX
>> +};
>> +
[...]
>> diff --git a/tools/perf/util/hisi-ptt.c b/tools/perf/util/hisi-ptt.c
>> new file mode 100644
>> index 000000000000..9798e297e7ab
>> --- /dev/null
>> +++ b/tools/perf/util/hisi-ptt.c
>> @@ -0,0 +1,192 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * HiSilicon PCIe Trace and Tuning (PTT) support
>> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
>> + */
>> +
>> +#include <byteswap.h>
>> +#include <endian.h>
>> +#include <errno.h>
>> +#include <inttypes.h>
>> +#include <linux/bitops.h>
>> +#include <linux/kernel.h>
>> +#include <linux/log2.h>
>> +#include <linux/types.h>
>> +#include <linux/zalloc.h>
>> +#include <stdlib.h>
>> +#include <unistd.h>
>> +
>> +#include "auxtrace.h"
>> +#include "color.h"
>> +#include "debug.h"
>> +#include "evlist.h"
>> +#include "evsel.h"
>> +#include "hisi-ptt.h"
>> +#include "hisi-ptt-decoder/hisi-ptt-pkt-decoder.h"
>> +#include "machine.h"
>> +#include "session.h"
>> +#include "symbol.h"
>> +#include "tool.h"
>> +#include "util/synthetic-events.h"
>> +#include <internal/lib.h>
>
> that's a lot of includes for such a small c file ...
>
They're necessary I think. Since you point it out I'll do a check and git rid of
the unnecessary including if there is.
>> +
>> +struct hisi_ptt {
>> + struct auxtrace auxtrace;
>> + u32 auxtrace_type;
>> + struct perf_session *session;
>> + struct machine *machine;
>> + u32 pmu_type;
>> +};
[...]
>> +
>> +static int hisi_ptt_flush(struct perf_session *session __maybe_unused,
>> + struct perf_tool *tool __maybe_unused)
>
> if it's valid to stub this function - s390-cpumsf.c does this also - then can we have it such that auxtrace__flush_events() can handle !flush_events (and avoid stubs)?
>
>> +{
>> + return 0;
>> +}
>> +
>> +static void hisi_ptt_free_events(struct perf_session *session __maybe_unused)
>> +{
>> +}
>
> As above, maybe we can avoid such stubs
>
ok. But I'd prefer to do it in a separate patch after this series to ease the review, considering
we have only 2 cases here and we already have a refactor in this series, if you don't object.
Will fix the reset comments.
Thanks,
Yicong
More information about the linux-arm-kernel
mailing list