[PATCH v4 07/12] drm: bridge: samsung-dsim: Fix PLL_P (PMS_P) offset

[Jagan Teki]

On Tue, Aug 30, 2022 at 1:12 AM Adam Ford <aford173 at gmail.com> wrote:
>
> On Mon, Aug 29, 2022 at 1:41 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > The i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
> > with 13.7.10.1 Master PLL PMS Value setting Register mentioned PMS_P offset
> > range from BIT[18-13] and the upstream driver is using the same offset.
> >
> > However, offset 13 is not working on i.MX8M Mini platforms but downstream
> > NXP driver is using 14 [1] and it is working with i.MX8M Mini SoC.
>
> From the line you highlighted in the link, the downstream NXP ones
> shows 13 if I'm reading it correctly.
>
> #define PLLCTRL_SET_P(x) REG_PUT(x, 18, 13)

PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().

Please check this for additional information
https://github.com/fschrempf/linux/commit/bbb3549a99e162ef6ad4c83d5fd4d39a6daa6d56

I'll update the additional information in commit messages in v5.

Thanks,
Jagan.