[PATCH v8 0/3] Add support for lan966x flexcom chip-select configuration

[Kavyasree.Kotagiri at microchip.com]

> 
> > Hi Lee,
> >
> > Are you planning to take this patch series for 6.1 or Can we include them
> through arm-soc pull-request?
> 
> I don't seem to have visibility.
> 
Please find the patches below:
https://lore.kernel.org/lkml/20220708115619.254073-1-kavyasree.kotagiri@microchip.com/T/

> Have I Acked it already?
> 
No. 

> BTW, this is my old email address.
> 
> Please use the one in my signature instead.
> 
> > > -----Original Message-----
> > > From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri at microchip.com]
> > > Sent: Friday, July 8, 2022 5:26 PM
> > > To: robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org; Nicolas
> Ferre -
> > > M43238 <Nicolas.Ferre at microchip.com>;
> alexandre.belloni at bootlin.com;
> > > Claudiu Beznea - M18063 <Claudiu.Beznea at microchip.com>;
> > > UNGLinuxDriver <UNGLinuxDriver at microchip.com>
> > > Cc: devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-
> > > kernel at vger.kernel.org; Kavyasree Kotagiri - I30978
> > > <Kavyasree.Kotagiri at microchip.com>
> > > Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select
> > > configuration
> > >
> > > This patch series converts atmel-flexcom bindings into json-schema
> format.
> > > Adds support for lan966x flexcom chip-select configurations and its
> > > DT bindings.
> > >
> > > v7 -> v8:
> > >  - Added back patternProperties for child nodes.
> > >  - Changed compatible string to microchip,lan9668-flexcom.
> > >
> > > v6 -> v7:
> > >  - Change filename to atmel,sama5d2-flexcom.yaml
> > >  - Add #address-cells, #size-cells to flexcom node - Fixed warnings.
> > >
> > > v5 -> v6:
> > >  - Removed spi node from example as suggested by Rob and
> > >    also pattern properties(spi dt-bindings conversion to yaml patch is
> under
> > > review).
> > >    https://patchwork.kernel.org/project/linux-arm-
> > > kernel/patch/20220629125804.137099-1-sergiu.moga at microchip.com/
> > >    Once this is accepted, I will add back spi example through new patch.
> > >
> > > v4 -> v5:
> > >  - Fix indentations of DT example.
> > >  - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
> > >    "reg" property as it is not required.
> > >
> > > v3 -> v4:
> > >  - Fix dtschema errors.
> > >  - Add a condition to flexcom chip-selects configuration as chip-select
> > >    lines are optional.
> > >
> > > v2 -> v3:
> > >  - changed IRQ flag in dt-bindings example.
> > >  - added reg property specific to lan66x which is missed in v2.
> > >  - used goto label for clk_disable in error cases.
> > >
> > > v1 -> v2:
> > >  - minor fix in title of dt-bindings.
> > >  - Modified new dt properties usage in atmel,flexcom.yaml.
> > >  - Used GENMASK and macros for maximum allowed values.
> > >  - Use u32 values for flexcom chipselects instead of strings.
> > >  - disable clock in case of errors.
> > >
> > > Kavyasree Kotagiri (3):
> > >   dt-bindings: mfd: Convert atmel-flexcom to json-schema
> > >   dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string
> for
> > >     lan966x
> > >   mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
> > >     configuration
> > >
> > >  .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 155
> ++++++++++++++++++
> > >  .../devicetree/bindings/mfd/atmel-flexcom.txt |  63 -------
> > >  drivers/mfd/atmel-flexcom.c                   |  94 ++++++++++-
> > >  3 files changed, 248 insertions(+), 64 deletions(-)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-
> > > flexcom.txt
> > >
> >
> 
> --
> DEPRECATED: Please use lee at kernel.org