[PATCH v8 0/3] Add support for lan966x flexcom chip-select configuration

[Lee Jones]

On Mon, 05 Sep 2022, Kavyasree.Kotagiri at microchip.com wrote:

> Hi Lee,
> 
> Are you planning to take this patch series for 6.1 or Can we include them through arm-soc pull-request?

I don't seem to have visibility.

Have I Acked it already?

BTW, this is my old email address.

Please use the one in my signature instead.

> > -----Original Message-----
> > From: Kavyasree Kotagiri [mailto:kavyasree.kotagiri at microchip.com]
> > Sent: Friday, July 8, 2022 5:26 PM
> > To: robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org; Nicolas Ferre -
> > M43238 <Nicolas.Ferre at microchip.com>; alexandre.belloni at bootlin.com;
> > Claudiu Beznea - M18063 <Claudiu.Beznea at microchip.com>;
> > UNGLinuxDriver <UNGLinuxDriver at microchip.com>
> > Cc: devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> > kernel at vger.kernel.org; Kavyasree Kotagiri - I30978
> > <Kavyasree.Kotagiri at microchip.com>
> > Subject: [PATCH v8 0/3] Add support for lan966x flexcom chip-select
> > configuration
> > 
> > This patch series converts atmel-flexcom bindings into json-schema format.
> > Adds support for lan966x flexcom chip-select configurations and its
> > DT bindings.
> > 
> > v7 -> v8:
> >  - Added back patternProperties for child nodes.
> >  - Changed compatible string to microchip,lan9668-flexcom.
> > 
> > v6 -> v7:
> >  - Change filename to atmel,sama5d2-flexcom.yaml
> >  - Add #address-cells, #size-cells to flexcom node - Fixed warnings.
> > 
> > v5 -> v6:
> >  - Removed spi node from example as suggested by Rob and
> >    also pattern properties(spi dt-bindings conversion to yaml patch is under
> > review).
> >    https://patchwork.kernel.org/project/linux-arm-
> > kernel/patch/20220629125804.137099-1-sergiu.moga at microchip.com/
> >    Once this is accepted, I will add back spi example through new patch.
> > 
> > v4 -> v5:
> >  - Fix indentations of DT example.
> >  - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
> >    "reg" property as it is not required.
> > 
> > v3 -> v4:
> >  - Fix dtschema errors.
> >  - Add a condition to flexcom chip-selects configuration as chip-select
> >    lines are optional.
> > 
> > v2 -> v3:
> >  - changed IRQ flag in dt-bindings example.
> >  - added reg property specific to lan66x which is missed in v2.
> >  - used goto label for clk_disable in error cases.
> > 
> > v1 -> v2:
> >  - minor fix in title of dt-bindings.
> >  - Modified new dt properties usage in atmel,flexcom.yaml.
> >  - Used GENMASK and macros for maximum allowed values.
> >  - Use u32 values for flexcom chipselects instead of strings.
> >  - disable clock in case of errors.
> > 
> > Kavyasree Kotagiri (3):
> >   dt-bindings: mfd: Convert atmel-flexcom to json-schema
> >   dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for
> >     lan966x
> >   mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
> >     configuration
> > 
> >  .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 155 ++++++++++++++++++
> >  .../devicetree/bindings/mfd/atmel-flexcom.txt |  63 -------
> >  drivers/mfd/atmel-flexcom.c                   |  94 ++++++++++-
> >  3 files changed, 248 insertions(+), 64 deletions(-)
> >  create mode 100644
> > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-
> > flexcom.txt
> > 
> 

-- 
DEPRECATED: Please use lee at kernel.org