[PATCH v6 1/6] dt-bindings: media: Add Allwinner A31 ISP bindings documentation

[Paul Kocialkowski]

Hi Laurent,

On Sat 27 Aug 22, 00:12, Laurent Pinchart wrote:
> Hi Paul,
> 
> Thank you for the patch.

Thanks for the review!

> On Fri, Aug 26, 2022 at 08:41:39PM +0200, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the Allwinner A31 Image
> > Signal Processor (ISP).
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > Reviewed-by: Rob Herring <robh at kernel.org>
> > ---
> >  .../media/allwinner,sun6i-a31-isp.yaml        | 97 +++++++++++++++++++
> >  1 file changed, 97 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > new file mode 100644
> > index 000000000000..2fda6e05e16c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 Image Signal Processor Driver (ISP) Device Tree Bindings
> > +
> > +maintainers:
> > +  - Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - allwinner,sun6i-a31-isp
> > +      - allwinner,sun8i-v3s-isp
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Bus Clock
> > +      - description: Module Clock
> > +      - description: DRAM Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bus
> > +      - const: mod
> > +      - const: ram
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: CSI0 input port
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: CSI1 input port
> > +
> > +    anyOf:
> > +      - required:
> > +          - port at 0
> > +      - required:
> > +          - port at 1
> 
> I'd still like to see all ports that exist in the hardware being
> mandatory. I assume at least one of the A31 and V3s has two connected
> ports in the SoC or you wouldn't declare them both here :-)

Some SoCs (e.g. A83T) only have one CSI controller so we can't require both.
This could be a decision based on the compatible but my personal opinion is
that it's not really worth making this binding so complex.

We can always informally enforce that all possible links should be present
when merging changes to the soc dts.

What do you think?

Paul

> Apart from that, this looks good.
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > +
> > +    isp: isp at 1cb8000 {
> > +        compatible = "allwinner,sun8i-v3s-isp";
> > +        reg = <0x01cb8000 0x1000>;
> > +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&ccu CLK_BUS_CSI>,
> > +             <&ccu CLK_CSI1_SCLK>,
> > +             <&ccu CLK_DRAM_CSI>;
> > +        clock-names = "bus", "mod", "ram";
> > +        resets = <&ccu RST_BUS_CSI>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port at 0 {
> > +                reg = <0>;
> > +
> > +                isp_in_csi0: endpoint {
> > +                    remote-endpoint = <&csi0_out_isp>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> 
> -- 
> Regards,
> 
> Laurent Pinchart

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20220901/26b18a71/attachment.sig>