[PATCH 1/1] arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
Shawn Guo
shawnguo at kernel.org
Sun Oct 23 18:31:23 PDT 2022
On Mon, Sep 26, 2022 at 01:26:22PM +0200, Alexander Stein wrote:
> extcon does not work somehow, so switch to usb-role-switch instead.
So extcon was added without testing?
Shawn
>
> Fixes: dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM")
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
> .../dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 32 +++++++++++++++----
> 1 file changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> index bfb44630da6b..56323c989d55 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> @@ -34,11 +34,25 @@ reg_usdhc2_vmmc: regulator-vmmc {
> off-on-delay-us = <12000>;
> };
>
> - extcon_usbotg1: extcon-usbotg1 {
> - compatible = "linux,extcon-usb-gpio";
> + connector {
> + compatible = "gpio-usb-b-connector", "usb-b-connector";
> + type = "micro";
> + label = "X19";
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usb1_extcon>;
> - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&pinctrl_usb1_connector>;
> + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + usb_dr_connector: endpoint {
> + remote-endpoint = <&usb1_drd_sw>;
> + };
> + };
> + };
> };
> };
>
> @@ -106,13 +120,19 @@ &usbotg1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbotg1>;
> dr_mode = "otg";
> - extcon = <&extcon_usbotg1>;
> srp-disable;
> hnp-disable;
> adp-disable;
> power-active-high;
> over-current-active-low;
> + usb-role-switch;
> status = "okay";
> +
> + port {
> + usb1_drd_sw: endpoint {
> + remote-endpoint = <&usb_dr_connector>;
> + };
> + };
> };
>
> &usbotg2 {
> @@ -242,7 +262,7 @@ pinctrl_usbotg1: usbotg1grp {
> <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>;
> };
>
> - pinctrl_usb1_extcon: usb1-extcongrp {
> + pinctrl_usb1_connector: usb1-connectorgrp {
> fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>;
> };
>
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list