[PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

When the cpufreq driver is enabled, the buck2 regulator is kept powered on
by the dependency between the CPU nodes with 'cpu-supply' set. Without the
cpufreq driver the kernel will power off the regulator as it doesn't see
any users. This is obviously not what we want, therefore keep the regulator
powered on in any case.

Reported-by: Heiko Thiery <heiko.thiery at gmail.com>
Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Cc: stable at vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 213014f59b46..c3418d263eb4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -105,6 +105,7 @@ reg_vdd_arm: BUCK2 {
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <3125>;
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
-- 
2.33.0