[PATCH 7/8] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.

Reported-by: Heiko Thiery <heiko.thiery at gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 0e4509287a92..106e13945ae5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -124,8 +124,8 @@ mdio {
 
 		ethphy: ethernet-phy at 0 {
 			reg = <0>;
-			reset-assert-us = <100>;
-			reset-deassert-us = <100>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
 			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
 		};
 	};
-- 
2.33.0