[PATCH v16 04/14] counter: Update counter.h comments to reflect sysfs internalization

[Jonathan Cameron]

On Fri, 27 Aug 2021 12:47:48 +0900
William Breathitt Gray <vilhelm.gray at gmail.com> wrote:

> The Counter subsystem architecture and driver implementations have
> changed in order to handle Counter sysfs interactions in a more
> consistent way. This patch updates the Generic Counter interface
> header file comments to reflect the changes.
> 
> Signed-off-by: William Breathitt Gray <vilhelm.gray at gmail.com>f
Applied

> ---
>  drivers/counter/counter-core.c |  3 ++
>  include/linux/counter.h        | 62 ++++++++++++++++------------------
>  2 files changed, 33 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/counter/counter-core.c b/drivers/counter/counter-core.c
> index c533a6ff12cf..3cda2c47bacb 100644
> --- a/drivers/counter/counter-core.c
> +++ b/drivers/counter/counter-core.c
> @@ -38,6 +38,9 @@ static struct bus_type counter_bus_type = {
>   * This function registers a Counter to the system. A sysfs "counter" directory
>   * will be created and populated with sysfs attributes correlating with the
>   * Counter Signals, Synapses, and Counts respectively.
> + *
> + * RETURNS:
> + * 0 on success, negative error number on failure.
>   */
>  int counter_register(struct counter_device *const counter)
>  {
> diff --git a/include/linux/counter.h b/include/linux/counter.h
> index b69277f5c4c5..445f22d8bfe2 100644
> --- a/include/linux/counter.h
> +++ b/include/linux/counter.h
> @@ -188,11 +188,10 @@ struct counter_comp {
>  
>  /**
>   * struct counter_signal - Counter Signal node
> - * @id:		unique ID used to identify signal
> - * @name:	device-specific Signal name; ideally, this should match the name
> - *		as it appears in the datasheet documentation
> - * @ext:	optional array of Counter Signal extensions
> - * @num_ext:	number of Counter Signal extensions specified in @ext
> + * @id:		unique ID used to identify the Signal
> + * @name:	device-specific Signal name
> + * @ext:	optional array of Signal extensions
> + * @num_ext:	number of Signal extensions specified in @ext
>   */
>  struct counter_signal {
>  	int id;
> @@ -206,7 +205,7 @@ struct counter_signal {
>   * struct counter_synapse - Counter Synapse node
>   * @actions_list:	array of available action modes
>   * @num_actions:	number of action modes specified in @actions_list
> - * @signal:		pointer to associated signal
> + * @signal:		pointer to the associated Signal
>   */
>  struct counter_synapse {
>  	const enum counter_synapse_action *actions_list;
> @@ -217,15 +216,14 @@ struct counter_synapse {
>  
>  /**
>   * struct counter_count - Counter Count node
> - * @id:			unique ID used to identify Count
> - * @name:		device-specific Count name; ideally, this should match
> - *			the name as it appears in the datasheet documentation
> - * @functions_list:	array available function modes
> + * @id:			unique ID used to identify the Count
> + * @name:		device-specific Count name
> + * @functions_list:	array of available function modes
>   * @num_functions:	number of function modes specified in @functions_list
> - * @synapses:		array of synapses for initialization
> - * @num_synapses:	number of synapses specified in @synapses
> - * @ext:		optional array of Counter Count extensions
> - * @num_ext:		number of Counter Count extensions specified in @ext
> + * @synapses:		array of Synapses for initialization
> + * @num_synapses:	number of Synapses specified in @synapses
> + * @ext:		optional array of Count extensions
> + * @num_ext:		number of Count extensions specified in @ext
>   */
>  struct counter_count {
>  	int id;
> @@ -243,27 +241,27 @@ struct counter_count {
>  
>  /**
>   * struct counter_ops - Callbacks from driver
> - * @signal_read:	optional read callback for Signal attribute. The read
> - *			level of the respective Signal should be passed back via
> - *			the level parameter.
> - * @count_read:		optional read callback for Count attribute. The read
> - *			value of the respective Count should be passed back via
> - *			the val parameter.
> - * @count_write:	optional write callback for Count attribute. The write
> - *			value for the respective Count is passed in via the val
> + * @signal_read:	optional read callback for Signals. The read level of
> + *			the respective Signal should be passed back via the
> + *			level parameter.
> + * @count_read:		read callback for Counts. The read value of the
> + *			respective Count should be passed back via the value
> + *			parameter.
> + * @count_write:	optional write callback for Counts. The write value for
> + *			the respective Count is passed in via the value
>   *			parameter.
>   * @function_read:	read callback the Count function modes. The read
>   *			function mode of the respective Count should be passed
>   *			back via the function parameter.
> - * @function_write:	write callback for Count function modes. The function
> - *			mode to write for the respective Count is passed in via
> - *			the function parameter.
> - * @action_read:	read callback the Synapse action modes. The read action
> - *			mode of the respective Synapse should be passed back via
> - *			the action parameter.
> - * @action_write:	write callback for Synapse action modes. The action mode
> - *			to write for the respective Synapse is passed in via the
> - *			action parameter.
> + * @function_write:	optional write callback for Count function modes. The
> + *			function mode to write for the respective Count is
> + *			passed in via the function parameter.
> + * @action_read:	optional read callback the Synapse action modes. The
> + *			read action mode of the respective Synapse should be
> + *			passed back via the action parameter.
> + * @action_write:	optional write callback for Synapse action modes. The
> + *			action mode to write for the respective Synapse is
> + *			passed in via the action parameter.
>   */
>  struct counter_ops {
>  	int (*signal_read)(struct counter_device *counter,
> @@ -291,7 +289,7 @@ struct counter_ops {
>  
>  /**
>   * struct counter_device - Counter data structure
> - * @name:		name of the device as it appears in the datasheet
> + * @name:		name of the device
>   * @parent:		optional parent device providing the counters
>   * @ops:		callbacks from driver
>   * @signals:		array of Signals