[PATCH v16 02/14] counter: stm32-timer-cnt: Provide defines for slave mode selection

[Jonathan Cameron]

On Tue, 31 Aug 2021 15:40:37 +0200
Fabrice Gasnier <fabrice.gasnier at foss.st.com> wrote:

> On 8/27/21 5:47 AM, William Breathitt Gray wrote:
> > The STM32 timer permits configuration of the counter encoder mode via
> > the slave mode control register (SMCR) slave mode selection (SMS) bits.
> > This patch provides preprocessor defines for the supported encoder
> > modes.
> > 
> > Cc: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> > Signed-off-by: William Breathitt Gray <vilhelm.gray at gmail.com>
> > ---
> >  drivers/counter/stm32-timer-cnt.c | 16 ++++++++--------
> >  include/linux/mfd/stm32-timers.h  |  4 ++++
> >  2 files changed, 12 insertions(+), 8 deletions(-)  
> 
> Hi William,
> 
> You can add my:
> Reviewed-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
Applied.

Thanks,

J
> 
> Thanks,
> Fabrice
> 
> > 
> > diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
> > index 3fb0debd7425..1fbc46f4ee66 100644
> > --- a/drivers/counter/stm32-timer-cnt.c
> > +++ b/drivers/counter/stm32-timer-cnt.c
> > @@ -93,16 +93,16 @@ static int stm32_count_function_get(struct counter_device *counter,
> >  	regmap_read(priv->regmap, TIM_SMCR, &smcr);
> >  
> >  	switch (smcr & TIM_SMCR_SMS) {
> > -	case 0:
> > +	case TIM_SMCR_SMS_SLAVE_MODE_DISABLED:
> >  		*function = STM32_COUNT_SLAVE_MODE_DISABLED;
> >  		return 0;
> > -	case 1:
> > +	case TIM_SMCR_SMS_ENCODER_MODE_1:
> >  		*function = STM32_COUNT_ENCODER_MODE_1;
> >  		return 0;
> > -	case 2:
> > +	case TIM_SMCR_SMS_ENCODER_MODE_2:
> >  		*function = STM32_COUNT_ENCODER_MODE_2;
> >  		return 0;
> > -	case 3:
> > +	case TIM_SMCR_SMS_ENCODER_MODE_3:
> >  		*function = STM32_COUNT_ENCODER_MODE_3;
> >  		return 0;
> >  	default:
> > @@ -119,16 +119,16 @@ static int stm32_count_function_set(struct counter_device *counter,
> >  
> >  	switch (function) {
> >  	case STM32_COUNT_SLAVE_MODE_DISABLED:
> > -		sms = 0;
> > +		sms = TIM_SMCR_SMS_SLAVE_MODE_DISABLED;
> >  		break;
> >  	case STM32_COUNT_ENCODER_MODE_1:
> > -		sms = 1;
> > +		sms = TIM_SMCR_SMS_ENCODER_MODE_1;
> >  		break;
> >  	case STM32_COUNT_ENCODER_MODE_2:
> > -		sms = 2;
> > +		sms = TIM_SMCR_SMS_ENCODER_MODE_2;
> >  		break;
> >  	case STM32_COUNT_ENCODER_MODE_3:
> > -		sms = 3;
> > +		sms = TIM_SMCR_SMS_ENCODER_MODE_3;
> >  		break;
> >  	default:
> >  		return -EINVAL;
> > diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
> > index f8db83aedb2b..5f5c43fd69dd 100644
> > --- a/include/linux/mfd/stm32-timers.h
> > +++ b/include/linux/mfd/stm32-timers.h
> > @@ -82,6 +82,10 @@
> >  #define MAX_TIM_ICPSC		0x3
> >  #define TIM_CR2_MMS_SHIFT	4
> >  #define TIM_CR2_MMS2_SHIFT	20
> > +#define TIM_SMCR_SMS_SLAVE_MODE_DISABLED	0 /* counts on internal clock when CEN=1 */
> > +#define TIM_SMCR_SMS_ENCODER_MODE_1		1 /* counts TI1FP1 edges, depending on TI2FP2 level */
> > +#define TIM_SMCR_SMS_ENCODER_MODE_2		2 /* counts TI2FP2 edges, depending on TI1FP1 level */
> > +#define TIM_SMCR_SMS_ENCODER_MODE_3		3 /* counts on both TI1FP1 and TI2FP2 edges */
> >  #define TIM_SMCR_TS_SHIFT	4
> >  #define TIM_BDTR_BKF_MASK	0xF
> >  #define TIM_BDTR_BKF_SHIFT(x)	(16 + (x) * 4)
> >