[PATCH V2 09/10] ARM: dts: Add Raspberry Pi Compute Module 4 IO Board

[nicolas saenz julienne]

On Sat, 2021-08-07 at 13:06 +0200, Stefan Wahren wrote:
> This adds the matching carrier for Raspberry Pi Compute Module 4.
> Instead of xHCI USB host controller there is just a USB 2.0 interface
> connected to the DWC2 controller from the BCM2711. As a result
> there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
> connectors.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
> ---

A general note: the CM4 carrier board contains an RTC and a simple fan
controller, which will need to be enabled further down the road.

Regards,
Nicolas