[PATCH V2 00/10] ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support

[nicolas saenz julienne]

Hi Stefan,

On Sat, 2021-08-07 at 13:06 +0200, Stefan Wahren wrote:
> This series add support for the Raspberry Pi Compute Module 4 and its
> IO board.

Sorry for the late review. I finally got some time to review/test this
properly. The devicetree patches look really good, dtbs_check's shows no new
errors, and all peripherals work. The only thing I can't verify is PCIe as I
have nothing to plug into it, but it should work.

I'll apply the series (modulo the mmc patches) for-next soon.

Thanks!

> Changes in V2:
> - drop emmc2bus patch as it affects userspace (thanks to Marc Zyngier)
> - tested with CM4 and integrate sdhci patches from Nicolas (just include kHz fixups)
> - add Rob's Acked-by
> - add HS200 property to emmc2 node for a slight performance gain
> - move antenna comment to the proper position
> 
> Nicolas Saenz Julienne (2):
>   mmc: sdhci-iproc: Cap min clock frequency on BCM2711
>   mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711
> 
> Stefan Wahren (8):
>   ARM: dts: bcm2711: fix MDIO #address- and #size-cells
>   ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
>   dt-bindings: display: bcm2835: add optional property power-domains
>   ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
>   dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
>   ARM: dts: Add Raspberry Pi Compute Module 4
>   ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
>   arm64: dts: broadcom: Add reference to RPi CM4 IO Board
> 
>  .../devicetree/bindings/arm/bcm/bcm2835.yaml       |   1 +
>  .../bindings/display/brcm,bcm2835-dsi0.yaml        |   3 +
>  .../bindings/display/brcm,bcm2835-hdmi.yaml        |   3 +
>  .../bindings/display/brcm,bcm2835-v3d.yaml         |   3 +
>  .../bindings/display/brcm,bcm2835-vec.yaml         |   3 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts              |  42 ++-----
>  arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts           | 138 +++++++++++++++++++++
>  arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi             | 113 +++++++++++++++++
>  arch/arm/boot/dts/bcm2711.dtsi                     |   4 +-
>  arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           |  31 ++---
>  arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts         |  36 ++----
>  arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts         |  36 ++----
>  arch/arm/boot/dts/bcm2837-rpi-3-b.dts              |  36 ++----
>  arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi         |  34 +++++
>  arch/arm64/boot/dts/broadcom/Makefile              |   1 +
>  .../arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts |   2 +
>  drivers/mmc/host/sdhci-iproc.c                     |  21 +++-
>  18 files changed, 366 insertions(+), 142 deletions(-)
>  create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
>  create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
>  create mode 100644 arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
>  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
>