[PATCH] ARM: dts: gemini: convert obsolete SPI properties

[Corentin Labbe]

gpio-xxx are obsoletes properties, convert them to xxx-gpios.

Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
---
 arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
 arch/arm/boot/dts/gemini-sl93512r.dts      | 6 +++---
 arch/arm/boot/dts/gemini-sq201.dts         | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cc39289e99dd..b2a0f3b1441e 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -61,9 +61,9 @@ spi {
 		#size-cells = <0>;
 
 		/* Collides with IDE pins, that's cool (we do not use them) */
-		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a0916d3c1059..c78e55fd2562 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -87,9 +87,9 @@ spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 4aa17393f8a9..3104af698cd6 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -72,9 +72,9 @@ spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-- 
2.26.3