[PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges

[Shawn Guo]

On Tue, May 11, 2021 at 09:48:22AM +0000, Claudiu Manoil wrote:
> >-----Original Message-----
> >From: Shawn Guo <shawnguo at kernel.org>
> >Sent: Tuesday, May 11, 2021 6:07 AM
> [...]
> >Subject: Re: [PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window
> >ranges
> >
> >+ Claudiu
> >
> >On Wed, Apr 07, 2021 at 02:34:38PM +0200, Kornel Duleba wrote:
> >> Currently all PCIE windows point to bus address 0x0, which does not match
> >> the values obtained from hardware during EA.
> >> Replace those values with CPU addresses, since in reality we
> >> have a 1:1 mapping between the two.
> >>
> >> Signed-off-by: Kornel Duleba <mindal at semihalf.com>
> >
> >Claudiu,
> >
> >Do you have any comment on this?
> >
> 
> Well, probing is still working with this change, I've just tested it.
> 
> PCI listing at boot time changes from:
> 
> pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
> pci-host-generic 1f0000000.pcie:      MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
> pci-host-generic 1f0000000.pcie:      MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
> 
> to:
> 
> pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
> pci-host-generic 1f0000000.pcie:      MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000
> pci-host-generic 1f0000000.pcie:      MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000
> 
> and looks reasonable.
> Adding Vladimir and Alex just in case.
> 
> Acked-by: Claudiu Manoil <claudiu.manoil at nxp.com>

Thanks, Claudiu.

Kornel,

Do we need a Fixes tag for this patch?

Shawn