[PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges

[Claudiu Manoil]

>-----Original Message-----
>From: Shawn Guo <shawnguo at kernel.org>
>Sent: Tuesday, May 11, 2021 6:07 AM
[...]
>Subject: Re: [PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window
>ranges
>
>+ Claudiu
>
>On Wed, Apr 07, 2021 at 02:34:38PM +0200, Kornel Duleba wrote:
>> Currently all PCIE windows point to bus address 0x0, which does not match
>> the values obtained from hardware during EA.
>> Replace those values with CPU addresses, since in reality we
>> have a 1:1 mapping between the two.
>>
>> Signed-off-by: Kornel Duleba <mindal at semihalf.com>
>
>Claudiu,
>
>Do you have any comment on this?
>

Well, probing is still working with this change, I've just tested it.

PCI listing at boot time changes from:

pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
pci-host-generic 1f0000000.pcie:      MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
pci-host-generic 1f0000000.pcie:      MEM 0x01f8160000..0x01f81cffff -> 0x0000000000

to:

pci-host-generic 1f0000000.pcie: host bridge /soc/pcie at 1f0000000 ranges:
pci-host-generic 1f0000000.pcie:      MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000
pci-host-generic 1f0000000.pcie:      MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000

and looks reasonable.
Adding Vladimir and Alex just in case.

Acked-by: Claudiu Manoil <claudiu.manoil at nxp.com>

>Shawn
>
>> ---
>>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> index 262fbad8f0ec..85c62a6fabb6 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> @@ -994,19 +994,19 @@ pcie at 1f0000000 { /* Integrated Endpoint Root Complex */
>>  			msi-map = <0 &its 0x17 0xe>;
>>  			iommu-map = <0 &smmu 0x17 0xe>;
>>  				  /* PF0-6 BAR0 - non-prefetchable memory */
>> -			ranges = <0x82000000 0x0 0x00000000  0x1 0xf8000000 0x0 0x160000
>> +			ranges = <0x82000000 0x1 0xf8000000  0x1 0xf8000000 0x0 0x160000
>>  				  /* PF0-6 BAR2 - prefetchable memory */
>> -				  0xc2000000 0x0 0x00000000  0x1 0xf8160000 0x0 0x070000
>> +				  0xc2000000 0x1 0xf8160000  0x1 0xf8160000 0x0 0x070000
>>  				  /* PF0: VF0-1 BAR0 - non-prefetchable memory */
>> -				  0x82000000 0x0 0x00000000  0x1 0xf81d0000 0x0 0x020000
>> +				  0x82000000 0x1 0xf81d0000  0x1 0xf81d0000 0x0 0x020000
>>  				  /* PF0: VF0-1 BAR2 - prefetchable memory */
>> -				  0xc2000000 0x0 0x00000000  0x1 0xf81f0000 0x0 0x020000
>> +				  0xc2000000 0x1 0xf81f0000  0x1 0xf81f0000 0x0 0x020000
>>  				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
>> -				  0x82000000 0x0 0x00000000  0x1 0xf8210000 0x0 0x020000
>> +				  0x82000000 0x1 0xf8210000  0x1 0xf8210000 0x0 0x020000
>>  				  /* PF1: VF0-1 BAR2 - prefetchable memory */
>> -				  0xc2000000 0x0 0x00000000  0x1 0xf8230000 0x0 0x020000
>> +				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000 0x0 0x020000
>>  				  /* BAR4 (PF5) - non-prefetchable memory */
>> -				  0x82000000 0x0 0x00000000  0x1 0xfc000000 0x0 0x400000>;
>> +				  0x82000000 0x1 0xfc000000  0x1 0xfc000000 0x0 0x400000>;
>>
>>  			enetc_port0: ethernet at 0,0 {
>>  				compatible = "fsl,enetc";
>> --
>> 2.31.1
>>