[PATCH] arm64: dts: renesas: r8a779a0: Restore sort order

Niklas Söderlund niklas.soderlund+renesas at ragnatech.se
Wed Jun 23 11:13:17 PDT 2021


Hello,

On 2021-06-23 16:59:25 +0200, Geert Uytterhoeven wrote:
> The thermal node was inserted at the wrong place, breaking sort order
> (sort by unit address, but group nodes of the same type).
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> ---
> Probably it was my fault, not Niklas' ;-)

Most likely my fault, happy order is restored.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> 
> To be queued in renesas-devel for v5.15.
> 
>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 26 +++++++++++------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index a7dfade1801a87db..3676b2bd3d646cdb 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -327,6 +327,19 @@ sysc: system-controller at e6180000 {
>  			#power-domain-cells = <1>;
>  		};
>  
> +		tsc: thermal at e6190000 {
> +			compatible = "renesas,r8a779a0-thermal";
> +			reg = <0 0xe6190000 0 0x200>,
> +			      <0 0xe6198000 0 0x200>,
> +			      <0 0xe61a0000 0 0x200>,
> +			      <0 0xe61a8000 0 0x200>,
> +			      <0 0xe61b0000 0 0x200>;
> +			clocks = <&cpg CPG_MOD 919>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 919>;
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		tmu0: timer at e61e0000 {
>  			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
>  			reg = <0 0xe61e0000 0 0x30>;
> @@ -392,19 +405,6 @@ tmu4: timer at ffc00000 {
>  			status = "disabled";
>  		};
>  
> -		tsc: thermal at e6190000 {
> -			compatible = "renesas,r8a779a0-thermal";
> -			reg = <0 0xe6190000 0 0x200>,
> -			      <0 0xe6198000 0 0x200>,
> -			      <0 0xe61a0000 0 0x200>,
> -			      <0 0xe61a8000 0 0x200>,
> -			      <0 0xe61b0000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 919>;
> -			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> -			resets = <&cpg 919>;
> -			#thermal-sensor-cells = <1>;
> -		};
> -
>  		i2c0: i2c at e6500000 {
>  			compatible = "renesas,i2c-r8a779a0",
>  				     "renesas,rcar-gen3-i2c";
> -- 
> 2.25.1
> 

-- 
Regards,
Niklas Söderlund



More information about the linux-arm-kernel mailing list